Hi, I tested the translations of the microtek2 backend with the snapshot from= =20 09.01.03 and xsane 0.90. It works correctly. Thanks Henning for correctin= g my=20 mistakes (I somehow didn't realize that the translations are now in one=20 file.)
As for the option names,=20 #define M_NAME_QUALITY_SCAN "quality_scan" is corrected to #define M_NAME_QUALITY_SCAN "quality-scan" and #define M_NAME_FAST_SCAN "fast_scan" to #define M_NAME_FAST_SCAN "fast-scan" I added another bugfix and have the new files on my homepage. I also woul= d=20 like the new microtek2.conf there to be put to CVS. It has some more opti= ons=20 enabled by default that seem to work reliable. Bye Karsten On Thursday 09 January 2003 02:00, Henning Meier-Geinitz wrote: > Hi, > > On Thu, Jan 09, 2003 at 01:01:54AM +0100, Karsten Festag wrote: > > I have made some modifications to the microtek2 backend: > > > > [Todo List] > > - microtek2.c (scsi_read_control_bits): Make sure to pass a size_= t* > > to sanei_scsi_cmd(). > > > > -done. > > Ok. > > > -added german language support (microtek2.de.po) > > The translations are now done in one file per language > (sane-backends.de.po in this case). Also the charset is UTF-8 now. I > have merged the files in CVS. > > Please check if that works correctly. You'll need XSane 0.90 and > remove the old microtek2.mo files from your system. I guess you can't > access the CVS server, so have a look at > http://www.meier-geinitz.de/sane/snapshots/ . > > > -impoved support for Scanmaker X12USL > > -alpha support for Scanmaker 9800XL > > -some bugfixes > > Ok, microtek2.h and microtek2.c (microtek2_20030109) are applied to > CVS. > > By the way, check microtek2.h, SANE option names are not allowed to > conatin a "_". "The option name must consist of lower-case ASCII > letters (a--z), digits (0-- 9), or the dash character (-) only. The > first character must be a lower-case ASCII character (i.e., not a > digit or a dash)." > > > The files are downloadable via > > > > http://karstenfestag.gmxhome.de/software/list.html > > microtek2.desc: error 403: Forbidden! > > Bye, > Henning > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel
