Dirk, this is the same issue i had when working with the fi-4220 and fi-4120. aparently fujitsu changes some of the window bits on different models. some models don't like have 00 values in certain registers even if the register isn't used. have a look at roncemers fi-4120/4220 patches.
thanks dave Dirk Petersen wrote: > I have no Idea what the hex output could mean > but from reading the sources of that that driver > it apparently fails setting the window size of the > scanner glass (also in ADF mode) > > It might be useful to give some more info about the Scanner: > Fujitsu Image Scanner M3096G (SCSI finds M3096Gim) > Built: 1994/02 > Model name: MAS-A3E-2V > Part No: BO1L-4560-0011A#S1E > > I would not mind to delete a few lines of source code > and then recompile, but where to start ? > > I tried scanimage, scanadf and various options of xscanimage > because I thought there might be a wrong default value in the > driver, but unfortunately it always gives the same result. > > I even tells me, that there is not paper in the ADF when > I switch to ADF mode. So I think I can rule out Hardware, > SCSI or OS Problems, can't I ? > > I uploaded the OEM Manual which is pretty lowlevel > http://www.internetchen.de/tmp/m3096eg-manual.pdf > > Dirk > > > -----Original Message----- > > From: Deiters [mailto:u...@xenon.pc.uni-koeln.de] > > Sent: Thursday, March 06, 2003 6:20 PM > > To: dpeter...@internetchen.de > > Subject: Re: [sane-devel] lost with FUJITSU scanner M3096G > > > > > > ... the error code 4 indicates an invalid operation (you > > asked the scanner something it could not do), but that is > > already evident from the context. > > > > Can you find out what the hexdata block means? Sometimes a > > manufacturer removes a scanner option in a new model that is > > considered obsolete (e.g., scanning speed control), and any > > attempt to set a value causes an error. > > > > Regards, > > > > Ulrich Deiters > > > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel > >
