Hello, I been using my Epson 1650 for weeks without problems, but am now unable to get it to work. I've rebooted since I last had it working, but don't remember doing anything special since the reboot before that to make it work. Both xsane and scanimage have the same problem.
2.4.x kernel, usbcore/usb-ohci/scanner modules loaded. gamer:~/sane-backends-1.0.10> scanimage -V scanimage (sane-backends) 1.0.10; backend version 1.0.10 gamer:~/sane-backends-1.0.10> xsane -v xsane-0.90 (c) 1998-2002 Oliver Rauch gamer:~> sane-find-scanner <snip comments> found USB scanner (vendor=0x04b8, product=0x0110) at /dev/usb/scanner0 <snip comments> gamer:~> scanimage -L device `v4l:/dev/video0' is a Noname BT878(Hauppauge (bt878)) virtual device gamer:~> scanimage -d epson:/dev/usb/scanner0 [epson] Error opening the devicescanimage: open of device epson:/dev/usb/scanner0 failed: Invalid argument I tried setting SANE_DEBUG_SANEI_USB=128, and did the following: gamer:~/sane-backends-1.0.10> xsane epson:/dev/usb/scanner0 |& grep 4b8 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f, attach=0x4051cc34 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d, attach=0x4051cc34 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 [sanei_usb] sanei_usb_init: found kernel scanner device (0x04b8/0x0110) at /dev/usb/scanner0 sanei finds the device over and over, but never asks for product 0x0110. The odd thing is for vendor 0x04b8, it only asks for products 0x010f and 0x011d, but when I look in the backends directory of the source, those two are missing from the epson_usb.c, and all the others are never asked for. I tried rerunning "make install" for sane, and rerunning scanimage and xsane with /usr/local/lib/sane prepended to my LD_LIBRARY_PATH, with the same results. I can't think of what I could have done to break this. Anyone have any suggestions? Thanks, -Michael __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/
