On Fri, 29 Mar 2002 06:35:17 +0100, stef wrote: > There are two options: > > - set parallel port to EPP only in BIOS, and see what happens > > - try latest CVS which has some code to set ECPEPP in this case
In EPP-Mode scanimage -L seems to work now, with latest CVS-code compiled, but scanimage --device=umax_pp 1>1.pnm 2>errors-scan.log results in the following lines at the end of the error-log: ... [umax_pp] init: evaluating option <option astra 2000> [umax_pp] init: option astra 2000 P [umax_pp] open: device `' [umax_pp] open: trying default device 0x378, port=0x378 [umax_pp_low] SendCommand(0xE0) passed... [umax_pp_low] ClearRegister(0) passed... [umax_pp_low] Init001() passed... (umax_pp_low.c:3896) [umax_pp_low] Error! expected reg0B=0xC7, found 0x00! (umax_pp_low.c:3902) [umax_pp_low] Scanner needs probing ... [umax_pp_low] EPPRegisterWrite(0xA,0x0) passed... (umax_pp_low.c:3399) [umax_pp_low] ReleaseScanner() done ... [umax_pp_low] status 170 doesn't match! umax_pp_low.c:2640 [umax_pp_low] No scanner detected by 'RingScanner(2,0)'... [umax_pp_low] status 170 doesn't match! umax_pp_low.c:2640 [umax_pp_low] No scanner detected by 'RingScanner(5,0)'... [umax_pp_low] status 170 doesn't match! umax_pp_low.c:2640 [umax_pp_low] No scanner detected by 'RingScanner(5,10000)'... [umax_pp_low] status 170 doesn't match! umax_pp_low.c:2640 [umax_pp_low] No scanner detected by 'RingScanner(5,10000)'... [umax_pp_low] RingScanner passed... [umax_pp_low] SendCommand(0x30) passed ... (umax_pp_low.c:4388) [umax_pp_low] SendCommand(0x00) passed... (umax_pp_low.c:4395) [umax_pp_low] status 170 doesn't match! umax_pp_low.c:2806 [umax_pp_low] TestVersion(0) (umax_pp_low.c:4399) failed ... [umax_pp_mid] sanei_umax_pp_InitTransport() failed (umax_pp_mid.c:284) [umax_pp] failed to init transport layer on port 0x000 scanimage: open of device umax_pp failed: Error during device I/O [umax_pp] sane_exit: (...) I have sent the complete errorlogs to stef. Bye, Franz
