Hi thank for your answer. Here are results of different commands: lsmod: Module Size Used by Not tainted isofs 25792 0 (autoclean) inflate_fs 19328 0 (autoclean) [isofs] sb 7744 0 sb_lib 33888 0 [sb] uart401 6336 0 [sb_lib] sound 57292 0 [sb_lib uart401] soundcore 4068 5 [sb_lib sound] af_packet 12488 0 (autoclean) ip_vs 65400 0 (autoclean) usb-uhci 21668 0 (unused) usbcore 59072 1 [usb-uhci] 3c59x 25928 0 (autoclean) (unused) supermount 62180 2 (autoclean) ext3 61856 1 (autoclean) jbd 39512 1 (autoclean) [ext3] rtc 5880 0 (autoclean) reiserfs 169312 4
dmesg | grep -i usb: usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 09:46:29 Jul 16 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xfca0, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found usb-uhci.c: v1.275:USB Universal Host Controller Interface driver cat /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=fca0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms I don't know how install patch there is no installation guide. Thank you again for your help Franck -----Original Message----- From: Rene Rebe [mailto:rene.r...@gmx.net] Sent: Monday, July 15, 2002 5:37 PM To: COLLINEAU Franck FTRD/DMI/TAM Cc: sane-de...@mostang.com Subject: Re: [sane-devel] scanjet HP5300C Hi. On: Mon, 15 Jul 2002 17:27:03 +0200, "COLLINEAU Franck FTRD/DMI/TAM" <franck.collin...@rd.francetelecom.com> wrote: > Greetings, > > I would like to install a scanjet HP 5300C under Mandrake 8.2 > I have re-compiled the kernel with scsi generic suport checked and build as > module HP53XX usb scanner support. > But no scanner is detected > /proc/scsi/scsi is empty. > > What does I have to do now ? What does lsmod say? Is the hpusbscsi module loaded? Are the usb-core modules loaded and your chip recognized ("dmesg | grep -i usb" shold give you the answer)? Also please use the latest backend from: The Avision homepage is: http://drocklinux.dyndns.org/rene/avision/ And the new backend version can be obtained from: http://www.rocklinux.org/people/rene/sane/ http://www.rocklinux.de/people/rene/sane/ http://www2.rocklinux.org/people/rene/sane/ > Thanks > > Franck k33p h4ck1n6 René -- René Rebe (Registered Linux user: #248718 <http://counter.li.org>) e-mail: rene.r...@gmx.net, r...@rocklinux.org web: www.rocklinux.org, drocklinux.dyndns.org/rene/ Anyone sending unwanted advertising e-mail to this address will be charged $25 for network traffic and computing time. By extracting my address from this message or its header, you agree to these terms.
