Hi, I'm having problems with an Epson 1640 SU under Solaris 8. Sane backend: 1.0.7.
# epson.conf # # here are some examples for how to configure the EPSON backend # # SCSI scanner: scsi EPSON Perfection1640 /dev/scsi/processor/c1t5d0 # $Id: sgen_epson.conf,v 1.2 2002/03/27 11:11:04 elijah Exp $ # # sgen config file for the scanners # # sbl, 010820 #modified for epson by elijah 2002-03-26 device-type-config-list="processor"; name="sgen" class="scsi" target=5 lun=0; gorthaur:elijah 13:48 ~ > scanimage -L device `epson:/dev/scsi/processor/c1t5d0' is a Epson Perfection1640 flatbed scanner gorthaur:elijah 13:40 ~ > ls -laL /dev/scsi/processor/c1t5d0 crw-rw---- 1 root scanner 151, 5 Mar 27 12:14 /dev/scsi/processor/c1t5d0 gorthaur:elijah 13:48 ~ > ls -laL /opt/pd/bin/scanimage -rwxr-sr-x 1 root scanner 119412 Mar 5 12:01 /opt/pd/bin/scanimage gorthaur:elijah 13:40 ~ > /opt/pd/bin/scanimage -d epson:/dev/scsi/processor/c1t5d0 scanimage: sane_start: Error during device I/O It works to scan as root. We have an Umax scanner that is set up with exactly the config (not the same backend of course...) that works like it should.... I would be grateful for any advice! Best regards, Johan Bengtsson -- http://www.dd.chalmers.se/~elijah/
