Hi! Simon: yes, thank you, its better, but... (the scanner is doing something now) i start with "xsane canon_pp" and i got an error messege: "Faild to open device`canon_pp:parport0`:Error during device I/O"
in dmesg: "Mar 25 11:58:39 merkur kernel: ppdev0: registered pardevice Mar 25 11:58:39 merkur kernel: ppdev0: unregistered pardevice Mar 25 11:58:39 merkur kernel: lp0: ECP mode Mar 25 11:58:39 merkur kernel: ppdev0: registered pardevice Mar 25 11:58:53 merkur kernel: ppdev0: released pardevice because user-space forgot Mar 25 11:58:53 merkur kernel: ppdev0: unregistered pardevice" i set this too: /proc/sys/dev/parport/parport0/irq 11 /proc/sys/dev/parport/parport0/dma 3 garfy On 25 Mar 2002, Simon Krix wrote: > Hi Garfy, > > > i tried to use xsane, but its say: No devices available > > /etc/sane.d/canon.conf: /dev/lp0 (or parport0?) > > /etc/sane.d/dll.conf: canon > > if i connect the printer to the scanner the xsane segfault. > > im not a linux guru :) > > i have no idea what is wrong, somebody can help me? > > thanks > > /sorry about my english/ > > Don't connect the printer to the scanner. That breaks the driver. If you > can't use a seperate port for each, get a cheap switchbox from somewhere > (or just unplug the printer each time). > > To run xsane, just enter "xsane canon_pp". If that says "no scanner > detected" it probably means you didn't install the SANE-backends-1.0.7 > patch properly. > > Does that help? > > -Simon > > -- > ----------------------- > kin...@users.sourceforge.net > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel >
