Hi, On Tue, Mar 05, 2002 at 06:20:29PM +0000, dave junk wrote: > Im running RH7.2 with a Scanmagic 1200 CU plus scanner. After some reasearch > I found that this is a Mustek 1200 cu plus.
This is the first report a have about this SCanner. But usually the ScanMagic are equivalent to Mustek scanners. Is the vndor id 0x055f and the product id 0x0008? > This appears to be supported, the Mustek home page on > http://www.meier-geinitz.de/sane/scanners.html > lists it as supported It is supported. > I re-compiled my kernel 2.4.9-21 to incluse usb support etc. > I mounted the usbdevfs > If i check /proc/bus/usb/drivers I can see the scanner 48- 63 usbscanner Is the scanner lsited in /proc/bus/usb/devices and is there a line with "driver=usbscanner"? If no ("driver=(none)" the scanner wasn't detected by the scanner driver and you must tell him maually: rmmod scanner; modprobe scanner vendor=0x055f product=0x0008. > I mknod /dev/scanner c 180 48 Don't do that. That's only for SCSI scanners. Remove this file and use "mknod /dev/usb/scanner0 c 180 48". Also check the permissions of this file. Edit mustek_usb.conf and enter something like this: /dev/usbscanner0 option 1200cu_plus If this doesn't work, please sen the output of sane-find-scanner and a debug log from "SANE_DEBUG_MUSTEK_USB=255 scanimage -L 2>debugg.log" to me. Bye, Henning
