hi ! i just upgraded sane to 1.0.7 and got some strange problems;
here is output from rpm: [root@server /root]# rpm -qa|grep sane sane-frontends-1.0.7-2 sane-backends-devel-1.0.7-6 xsane-0.84-2 sane-backends-1.0.7-6 xsane-gimp-0.84-2 sane-find-scanner find my scanner ok, but scanimage don't. my dll.conf contains "net" and "scanimage". my scanimage.conf contains a pointer to /dev/scanner which is a symbolic link to /dev/sg3. output from sane-find-scanner: [root@server /root]# sane-find-scanner # Note that sane-find-scanner will find any scanner that is connected # to a SCSI bus and some scanners that are connected to the Universal # Serial Bus (USB) depending on your OS. It will even find scanners # that are not supported at all by SANE. It won't find a scanner that # is connected to a parallel or proprietary port. sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device /dev/scanner sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device /dev/sg3 sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device /dev/sgd and ouput from scanimage -L: [root@server /root]# scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). how do i correct this problems, tough i cannot find a sollution not on faq nor documentation? -- sincerly morten LC1OCT tlf: +47 7027 7036 fax +47 70 27 82 77
