Hi, On Tue, Oct 22, 2002 at 10:40:26PM +0000, antoine wrote: > > Artec E+ 48U > > Vendor 0x05d8 Product 0x4003: Supported by the tevion9693 backend. > > Based on GT6816 chip. MD 9693 + 9705 and Trust Easy Webscan seem to > > be clones. > We tried with this driver but seems not working ...
At least with the gt68xx backend, when the scan slider doesn't move and the image is dark that's usually a sign of the wrong firmware. But you don't seem to have a choice, there is only "1200.usb"? What's the optical resolution in X and in Y-direction? is it a CIS-Scanner? Is it really the same as the e+ Pro? > xsane starts well but no scan possible, the motor does not start and the > inside ligth is always off but the green LED is flashing a few minutes. > So, what can I do now ? You can try the gt68xx backend (http://www.meier-geinitz.de/sane/gt68xx-backend/), but I'm not sure if it gives you better results. You must add "usb 0x05d8 0x4004" to gt68xx.conf and edit backend/gt68xx_devices.c. There is some infor on the webpage. I would start using the BearPaw 2400 CU Plus as sample, so add (near the end of the file, before the {0, 0, NULL}): {0x05d8, 0x4004, &mustek_2400cuplus_model}, And tell us, what happens. Bye, Henning
