Oliver Neukum wrote:
>
> Am Dienstag, 7. August 2001 19:37 schrieb Jed S. Baer:
> > Greetings folks.
> >
> > Regretably, there isn't much to go on here, unless sharing an IRQ with
> > my SB-Live is what's causing the lockup.
> >
> > System is an ABIT KA7 mobo, running RH7.1, custom kernel.
>
> Kernel version ?
2.4.2-2
FWIW, the last "History" line in microtec.c:
* 20010210 Version 0.3.0
>
> Do not load the scanner module, _only_ microtek for that scanner.
> Do not add a single device. This happens automatically.
>
> Send the content of /proc/scsci/scsi after loading microtek
>
> Regards
> Oliver Neukum
[root@priapas /root]# modprobe usb-uhci
[root@priapas /root]# modprobe sg
[root@priapas /root]# modprobe microtek
[root@priapas /root]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Model: Scanner V6USL Rev: 1.00
Type: Scanner ANSI SCSI revision: 02
[root@priapas /root]# sane-find-scanner
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus. It will even find scanners that are not supported
# at all by SANE. It won't find a scanner that is connected to a
# parallel, USB or other non-SCSI port.
[root@priapas /root]# uname -a
Linux priapas 2.4.2-2 #3 Mon Aug 6 12:26:59 MDT 2001 i686 unknown
OK, that looks fine. So, I invoked scanimage -dev=microtek2:/dev/sga ...
Cool! I've never had a kernel panic before. Lots of stuff going by on
the console, including "Aiiee! Killing the interrupt handler". A small
bit more scan head activity this time, maybe a whole second. So now I
have two questions.
1) Is there some place where the kernel tries to save the panic output?
Or -- short of setting up a serial console and logging it on another
box, how can I capture it? (Nothing in /var/log/messages.)
2) If there isn't any easy way to capture it, is there a subset of the
last 24 lines which I don't need to write down?
I will try to find a way to move either the SoundBlaster or the USB to
another IRQ.
Thanks,
jed
--
"Some people spend an entire lifetime wondering if they've made a
difference. Free Software developers don't have that problem."
