hello sorry for the newbie question on an devel-list, but i did not find the help i need.
i try to get my epson perfection640u (usb) scanner running with sane and xsane. but xsane always says "no devices available". i know it should work, the scanner is supported. i found a mini howto in the faq (it's under www.arrakis.es), i followed the installation-steps, but without success. where can i find a installingguide or what do i have to do?? in the following some infos about my system. thanks a lot in advance jochen --------------------------------- jochen@linux:~ > xsane -v xsane-0.70 package xsane-0.70 SANE-1.0 compiled with GTK-1.2.8 with GIMP support, compiled with GIMP-1.2.0 XSane output formats: jpeg, png, pnm, ps, raw, tiff --------------------------------- jochen@linux:~ > scanimage --list-devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). --------------------------------- linux:~ # cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04b8 ProdID=010c Rev= 0.01 S: Manufacturer=EPSON S: Product=Perfection640 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms ---------------------------------- linux:~ # grep vendor /etc/modules.conf options scanner vendor=0x04b8 product=0x010c ---------------------------------- linux:~ # ll /dev/usbscanner crw-r--r-- 1 root root 180, 48 Jan 19 2001 /dev/usbscanner linux:~ # ll /dev/scanner lrwxrwxrwx 1 root root 15 Sep 8 05:47 /dev/scanner -> /dev/usbscanner ----------------------------------- linux:~ # lsmod Module Size Used by scanner 5952 0 (unused) parport_pc 13456 1 (autoclean) lp 4656 0 (autoclean) parport 12736 1 (autoclean) [parport_pc lp] ppp_deflate 39616 0 (autoclean) bsd_comp 4240 0 (autoclean) ppp_async 5968 0 (autoclean) ppp_generic 12704 0 (autoclean) [ppp_deflate bsd_comp ppp_async] nls_iso8859-1 2848 0 (autoclean) mousedev 3968 0 (unused) hid 11744 0 (unused) input 3104 0 [mousedev hid] usb-uhci 21712 0 (unused) ne2k-pci 4448 1 (autoclean) 8390 6080 0 (autoclean) [ne2k-pci] ipchains 31456 0 (unused) snd-seq-midi 4400 0 (unused) snd-seq-midi-event 3168 0 [snd-seq-midi] snd-seq 44480 0 [snd-seq-midi snd-seq-midi-event] snd-card-ens1371 2400 0 snd-ens1371 13136 0 [snd-card-ens1371] snd-pcm 36864 0 [snd-ens1371] snd-timer 10784 0 [snd-seq snd-pcm] snd-rawmidi 10944 0 [snd-seq-midi snd-ens1371] snd-seq-device 4416 0 [snd-seq-midi snd-seq snd-rawmidi] snd-ac97-codec 27392 0 [snd-ens1371] snd-mixer 28176 0 [snd-ens1371 snd-ac97-codec] snd 42672 1 [snd-seq-midi snd-seq-midi-event snd-seq snd-card-ens1371 snd-ens1371 snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ac97-codec snd-mixer] soundcore 3664 2 [snd] ide-scsi 8000 0 usbcore 46480 1 [scanner hid usb-uhci] --------------------------------------------- _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
