Hi,
I'm new to this list and if there is a information source I could have looked
up - let me know :) I tried the webpage and the archive.
My problem started one week ago, as I turned one the maschine and sane
couldn't find my scanner. It worked on this Maschine with the same setting
more than 6 months without any problems. I installed a newer version of sane
(1.0.6), but this didn't fixed the problem.
May someone one this list can help me to bring the scanner back online.
The scanner is working under windows, so it isn't broken and the scsi system
looks ok to me, the only thing are the rights on the links to the scsi
devices, but that didn't changed (I guess).
Ciao,
Marcus
P.S:
The things I checked:
-----------------------------------------
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST39173W Rev: 6244
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: Traxdata Model: CDR4120 Rev: 5.0Q
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: AVISION Model: AV630CS Rev: 1.20
Type: Scanner ANSI SCSI revision: 02
---------------------------------------------
cat /proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 6.2.1
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
.....
Channel A Target 6 Negotiation Settings
User: 10.000MB/s transfers (10.000MHz, offset 255)
Goal: 3.300MB/s transfers
Curr: 3.300MB/s transfers
Channel A Target 6 Lun 0 Settings
Commands Queued 1
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
....
-----------------------------------------------
ls -la /dev/sg*
lr-xr-xr-x 1 root root 36 Feb 4 17:36 sg0 ->
scsi/host0/bus0/target0/lun0/generic
lr-xr-xr-x 1 root root 36 Feb 4 17:36 sg1 ->
scsi/host0/bus0/target3/lun0/generic
lr-xr-xr-x 1 root root 36 Feb 4 17:36 sg2 ->
scsi/host0/bus0/target4/lun0/generic
lr-xr-xr-x 1 root root 36 Feb 4 17:36 sg4 ->
scsi/host0/bus0/target6/lun0/generic
lr-xr-xr-x 1 root root 36 Feb 4 17:36 sgd ->
scsi/host0/bus0/target6/lun0/generic
-------------------------------------------------
xscanimage avision:/dev/scsi/host0/bus0/target6/lun0/generic
brings up a failed to open /dev/.../generic (or /dev/scanner or ...) invalid
argument
-------------------------------------------------
sane-find-scanner couldn't find anything
-------------------------------------------------
cat /etc/sane.d/saned.conf
localhost
--------------------------------------------------
cat /etc/sane.d/avision.conf
scsi AVISION
/dev/scanner
--------------------------------------------------
System:
-Mandrake 8.1 (original mandrake kernel 2.4.8-26mdksmp)
--------------------------------------------------
rpm -qa|grep sane
libsane1-devel-1.0.6-2mdk
sane-frontends-1.0.6-1mdk
sane-backends-1.0.6-2mdk
xsane-gimp-0.84-2mdk
xsane-0.84-2mdk
libsane1-1.0.6-2mdk
----------------------------------------------------
