Hello. Your scanner might be possibly supported in a future version of the Avision backend. At least the "ScanJet 5300C", "ScanJet 5370C" and "scanjet 7400c" might be.
These scanners are Avision OEM scanners, using the Avision SCSI protokol. I mainly waiting for HP to send me a test scanner (they try to do this since the last CeBIT in 2001 ...) - because debugging system hangs and exchanging debug values again and again (including several days of eMail delay) isn't that funny. Maybe some eMails to <juergen_pro...@hp.com> or your countries HP company - telling them that there is public demand for Linux support - might help. The hack-in-progress can be found at: http://www.rocklinux.org/people/rene/sane/ From: Tony Dalton - SunUK IT/OPS <tony.dal...@sun.com> Subject: [sane-devel] Support for HP 7490? Date: Thu, 3 Jan 2002 11:45:02 +0000 (GMT) > Hi, > > I have an HP7490 and have installed sane back and front ends, but it looks > like > the software isn't seeing the scanner: > > sane-find-scanner: found SCSI scanner "hp scanjet 7400c 0.8M" at device > /dev/scg0c > > root[sh]@media-gmp3-lab# ./xscanimage > [xscanimage] No scanners were identified. > > Am I doing something wrong or is this something to do with HP changing the > scsi > interface on later models? hp.conf is as follows: > > root[sh]@media-gmp3-lab# more hp.conf > scsi HP > /dev/scg0c > > I just tried appending the 'c' so it'll look at the correct target, but it > still > didn't work. I've also tried xvscan to no avail and am running out of ideas, > any > help would be greatly appreciated. > > Thanks, > > Tony > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel >
