This should be fixed in 1.3.0 release. Could you please retry and confirm?
Hello, I am currently trying to get SANE to scan with a Samsung SCX-4x21F MFP on Arch Linux. I have sane 1.2.1-5 and xsane 0.999-6 on kernel 6.6.10-arch1-1 (KDE Plasma Wayland) with the following driver packages: samsung-unified-driver 1.00.39-7 samsung-unified-driver-common 1.00.39-7 samsung-unified-driver-printer 1.00.39-7 samsung-unified-driver-scanner 1.00.39-7 dmesg: [75005.102178] usb 3-9: new full-speed USB device number 6 using xhci_hcd [75005.245210] usb 3-9: New USB device found, idVendor=04e8, idProduct=3419, bcdDevice= 1.00 [75005.245235] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [75005.245245] usb 3-9: Product: SCX-4x21 Series [75005.245248] usb 3-9: Manufacturer: Samsung [75005.245249] usb 3-9: SerialNumber: <serial redacted>. [75005.926529] usblp 3-9:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04E8 pid 0x3419 [75005.926577] usbcore: registered new interface driver usblp Error I am getting: Failed to start scanner: Error during device I/O If I wait a bit then click scan again, it starts scanning, however the scan head stuck at the end of the flatbed and XSane hangs for a bit then the following error is shown: Error during read: Error during device I/O After this, the scan head is still stuck at the end of the flatbed Any help would be appreciated. Thank you.
OpenPGP_signature.asc
Description: OpenPGP digital signature
