Hmm...it hasn't been long enough since a restart yet, because it's not
doing it ATM, but nonetheless if it's a question of an extra 45 mb I
think we have it covered:
tmpfs 5.9G 0 5.9G 0% /dev/shm
But I'll check anyway next opportunity and report back if it's a positive.
Kev
On 2013-08-24 11:51 AM, Ricky Nance wrote:
I wonder if your hitting the /run/lock fill up that another user
reported on a week or two ago (they are using ubuntu). I think the
solution was to make that tmpfs partition bigger (like 50 mb instead of
5 mb). next time it is unresponsive check and see what the output of 'df
-h' is.
Ricky
On Sat, Aug 24, 2013 at 10:02 AM, Kevin Field <k...@brantaero.com
<mailto:k...@brantaero.com>> wrote:
I've upgraded to 4.0.9 and this behaviour persists.
Should I file a bug report, do you think? �Is nobody else
experiencing this?
Thanks,
Kev
On 2013-08-20 11:40 AM, Kristofer Pettijohn wrote:
You may want to see if it is this bug, which is fixed in 4.0.9:
https://bugzilla.samba.org/__show_bug.cgi?id=9820
<https://bugzilla.samba.org/show_bug.cgi?id=9820>
------------------------------__------------------------------__------------
*From: *"Kevin Field" <k...@brantaero.com <mailto:k...@brantaero.com>>
*To: *samba@lists.samba.org <mailto:samba@lists.samba.org>
*Sent: *Tuesday, August 20, 2013 9:38:32 AM
*Subject: *[Samba] AD DC eventually not browsable without restart
I have a SerNet Samba 4.0.8 AD DC running on CentOS 6.4 (newdc)
replicating from a W2K3 DC (olddc). �When I first launch Samba using
`sudo samba`, I can go to the Windows server and browse to
\\newdc in
Explorer, and I see mytestshare, netlogon, printers, sysvol, and
"Printers and Faxes".
After a while (I'm not sure how long precisely, but under 24
hours) I
could not navigate to \\newdc without the following error:
---------------------------
\\newdc
---------------------------
\\newdc is not accessible. You might not have permission to use this
network resource. Contact the administrator of this server to
find out
if you have access permissions.
The Server service is not started.
---------------------------
OK
---------------------------
But in the interim, I had not been doing anything in the system,
so I'm
not sure what might have caused it. �One time it even happened on a
weekend when no backup or anything particularly special is scheduled
while I was away.
Anyway, running `sudo killall samba` and then `sudo samba` makes it
suddenly browsable again.
This is happening every day. �I guess it would be best to figure
this
problem out before we make Samba the only DC.
Here's my smb.conf, mostly set up by samba-tool, and now a work in
progress to add the extras we will use:
# Global parameters
[global]
� � � � � workgroup = MYDOMAIN
� � � � � realm = mydomain.lan
� � � � � netbios name = NEWDC
� � � � � server role = active directory domain controller
� � � � � server services = rpc, nbt, wrepl, ldap, cldap, kdc,
drepl,
winbind, ntp_signd, kcc, dnsupdate, smb, dns
� � � � � allow dns updates = true
� � � � � dns forwarder = 192.168.1.1
# � � � �dns recursive queries = yes
� � � � � dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr,
netlogon, lsarpc, spoolss, drsuapi, dssetup, unixinfo, browser,
eventlog6, backupkey, dnsserver, winreg, srvsvc
# � � � dcerpc endpoint servers = winreg srvsvc
� � � � � load printers = yes
� � � � � printing = cups
[netlogon]
� � � � � path = /var/lib/samba/sysvol/__mydomain.lan/scripts
� � � � � read only = No
[sysvol]
� � � � � path = /var/lib/samba/sysvol
� � � � � read only = No
[printers]
� � � �comment = All Printers
� � � �path = /var/spool/samba
� � � �browseable = Yes
� � � �read only = No
� � � �printable = Yes
[print$]
� � � �comment = Point and Print Printer Drivers
� � � �path = /var/lib/samba/printing
� � � �read only = No
[mytestshare]
� � � � � path = /srv/mytestshare/
� � � � � read only = No
Any ideas?
Thanks,
Kev
--
To unsubscribe from this list go to the following URL and read the
instructions: �https://lists.samba.org/__mailman/options/samba
<https://lists.samba.org/mailman/options/samba>
--
To unsubscribe from this list go to the following URL and read the
instructions: �https://lists.samba.org/__mailman/options/samba
<https://lists.samba.org/mailman/options/samba>
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
