If you do a CTRL-P in the main interface, you get the protocol builder. In the protocol builder you can change the existing TCP/UDP/DNS/Radius "protocol" definition (you can also create new ones). dirk ----- Original Message ----- From: Barry George (mailto:[email protected]) To: Servers Alive Discussion List (mailto:[email protected]) Sent: Thursday, September 29, 2011 4:00 PM Subject: [SA-list] Changing DNS targets in Default IPv4 queries
I thought I read once that you could change the DNS targets in SA via a registry mod. I cannot seem to find that now. Im trying to find a pattern but at best it looks random. Lately (mostly after business hours) some or all of my DNS host checks timeout causing a down. We have 6 dns servers (two external facing). I was thinking it might be a downstream issue against the DNS servers SA is checking against and wanted to try changing those targets. It could be just slow response but it seems odd that at times all the DNS servers at once timeout. Average response times are within the 200 ms range. Thanks Barry George IT Department Dougallmedia Thunder Bay Television CKPR /CJSD /CFNO /CFQK Radio TBnewswatch.com / The Source Newspaper To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
