in the HTML template based output you can use the <sa_ip> tag, that's the only way that you can access the resolved IP address.
From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of Bob Hartung Sent: Monday, March 28, 2011 5:45 PM To: Servers Alive Discussion List Subject: [SA-list] IP Address Option Up till now, I always used the IP address of the host to ping in SA. As such, the IP address naturally shows up in the "Entries" column. If one chooses to instead ping the name instead of the IP address of the host, there's no option to display the IP address other than to manually type it in as part of the "Pretty Name". Sometimes I setup PCs for monitoring that get their IP addresses through the DHCP server and it would be handy to know what IP address they currently hold. I'd like to suggest a "Resolved IP Address" console column. If there's a way to do this now, I've haven't come across it yet. Thanks. ---------------------- Bob Hartung Wisco Industries, Inc. 736 Janesville St. Oregon, WI 53575 Tel: (608) 835-3106 x215 Fax: (608) 835-7399 e-mail: bhartung(at)wiscoind.com To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
