If the port is up, and the correct message is send back to the user then SA
will flag it as being up and in most cases the user will be able to enter
his/her username.
(which is NOT the same as being able to login to the FTP server).
How to setup:
create new entry
enter the hostname/IP of the FTP server
on the CHECK tab select TCP protocol
in the listbox below that select FTP
that's it…
Dirk Bulinckx.
From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of
Ahmed Hassan
Sent: Wednesday, September 17, 2008 12:40 PM
To: Servers Alive Discussion List
Subject: Re: [SA-list] FTP Check
Thanks Dirk.
So does it mean that if the port connection is UP (OK) then the server should
accept connections from users?
So how do I set this check up?
----- Original Message ----
From: Dirk <[EMAIL PROTECTED]>
To: Servers Alive Discussion List <[email protected]>
Sent: Wednesday, 17 September, 2008 11:30:12
Subject: RE: [SA-list] FTP Check
The TCP-TFP check will connect to the FTP server (port connection) and see if
it does get the normal first "message " from the FTP server (being a response
that starts with 220)
Dirk Bulinckx.
From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of
Ahmed Hassan
Sent: Wednesday, September 17, 2008 11:45 AM
To: Servers Alive Discussion List
Subject: [SA-list] FTP Check
Hello
Is anyone using SA to monitor to an ftp server? I have an ftp server (titan)
which sometimes refuses connections from users and was wondering whether I can
use SA to monitor it.
If yes can you please let me know how to set it up.
Thanks
To unsubscribe send a message with UNSUBSCRIBE in the subject line to
[email protected]
If you use auto-responders (like out-of-the-office messages), make sure that
they are not sent to the list nor to individual members. Doing so will cause
you to be automatically removed from the list.
To unsubscribe send a message with UNSUBSCRIBE in the subject line to
[email protected]
If you use auto-responders (like out-of-the-office messages), make sure that
they are not sent to the list nor to individual members. Doing so will cause
you to be automatically removed from the list.
To unsubscribe send a message with UNSUBSCRIBE in the subject line to
[email protected]
If you use auto-responders (like out-of-the-office messages), make sure that
they are not sent to the list nor to individual members. Doing so will cause
you to be automatically removed from the list.
To unsubscribe send a message with UNSUBSCRIBE in the subject line to
[email protected]
If you use auto-responders (like out-of-the-office messages), make sure that
they are not sent to the list nor to individual members. Doing so will cause
you to be automatically removed from the list.
