Have a go with the updated version... http://beta.woodstone.nu/soft/setup_genSSHCom.exe
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Perry Sent: Friday, February 22, 2008 12:46 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Generic SSH command checker (COM CHECK) Good question, It obviously would be more useful to most on a down in a crisis situation, however that said There are good reasons e.g. It is good to know what the output was esp if you messed up your check then SA would report everything was fine because your criteria was not included in the error code, unless you also have SA check if an error was returned but even then what if the command was sytaxically correct but not doing as you expect, also other reason are extended diagnostics, information logging global stats, graphic represenataion e.g. If I set a check to test memory, cpu, disk (io, not usage) utilisation this could be monitored over time and graphically represented. This is a little speculative as my need is for alerts rather than historic evidence as I am lucky enough to have superiors that have no need for stats. We are all too busy doing actual work for that ;0) Mark Perry Systems & Networks Administrator Telephonetics VIP Ltd "making sound business sense" Simply dial +44 (0)1442 242 242 and ask for me by name. www.telephoneticsVIP.co.uk Providing innovative hosted and customer premises speech recognition and voice automation solutions. Disclaimer: available at http://www.telephoneticsVIP.co.uk/telephonetics/emaildisclaimer.jsp or by sending email to <mailto:[EMAIL PROTECTED] applies to this email. Registered address: 7th Floor, Hamilton House, 111 Marlowes, Hemel Hempstead, Hertfordshire HP1 1BB Registered in England No: 2831215 -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Friday, February 22, 2008 11:31 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Generic SSH command checker (COM CHECK) About the 2nd suggestion; would this be only on a DOWN that it should give that info or also on an UP? (I would make it an option to include it, just wondering if you see this for all statusses or only for a down one) Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Perry Sent: Friday, February 22, 2008 12:10 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Generic SSH command checker (COM CHECK) Hi Dirk this check is great, though could I possibly suggest as couple or changes? 1. Expand the result parms to look for "less than <" and "greater than >" as well as should/should not caontain. 2. Could you also have the extended error variable or variable than seem suitable also include the returned output of the command run e.g. I set a test check to look for high cpu usage on a multi cpu server per cpu, each cpu is tested individually and the result would be returned as "CPU <cpu number> under heavy load" Is it possible using this check to output each line which matches the criteria set in the test? As it currently stands all I receive is a message saying: <Server> is reporting a problem with external COM check (*NIX Generic SSH Command Checker). Date: 22/02/2008 Time: 10:45 Additional Info: 750 ms Error Returned: Output contains heavy load Instead it would be preferrable for something along these lines where after the SA message it also included the actual output of the command for each line that matches: crmhost-poole is reporting a problem with external COM check (*NIX Generic SSH Command Checker). Date: 22/02/2008 Time: 10:45 Additional Info: 750 ms Error Returned: Output contains heavy load: CPU 1 is under heavy load CPU 3 is under heavy load Regards Mark Perry Systems & Networks Administrator Telephonetics VIP Ltd "making sound business sense" Simply dial +44 (0)1442 242 242 and ask for me by name. www.telephoneticsVIP.co.uk Providing innovative hosted and customer premises speech recognition and voice automation solutions. Disclaimer: available at http://www.telephoneticsVIP.co.uk/telephonetics/emaildisclaimer.jsp or by sending email to <mailto:[EMAIL PROTECTED] applies to this email. Registered address: 7th Floor, Hamilton House, 111 Marlowes, Hemel Hempstead, Hertfordshire HP1 1BB Registered in England No: 2831215 -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Wednesday, February 20, 2008 8:56 PM To: Servers Alive Discussion List Subject: [SA-list] Generic SSH command checker (COM CHECK) A new External COM check was created for "generic" SSH commands. It's using the same logic as the already existing diskspace and process checker for *nix. Have a go with it and let us know if it works fine for you....http://beta.woodstone.nu/soft/setup_genSSHCom.exe Dirk Bulinckx. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
