The support is ALWAYS email support, never phonesupport. As for the response it was send twice now, if you didn't receive it maybe that you could check your spam filters. I can send the same mail a 3rd time, but I don't think that will help. If you can provide an alternate email address we will send it a 3rd time to the old address and put that alternate address in CC.
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Stout, Josh Sent: Tuesday, February 19, 2008 6:21 PM To: Servers Alive Discussion List Subject: RE: [SA-list] SA 6.x Teams fail to function "Excellent" support normally includes person to talk to. A single email address based in a foreign country with *still* no response is not "excellent." I'm sure they have good intentions and are nice people. But I'm not seeing any results. *Still* no response (other than the newsgroup -- which got a quick retort.) Josh Stout -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jason Passow Sent: Tuesday, February 19, 2008 11:56 AM To: Servers Alive Discussion List Subject: Re: [SA-list] SA 6.x Teams fail to function WOW! Seems like you are barking up the wrong tree here. We have all received GREAT support. Not just mediocre but EXCELLENT support. I do recall seeing a post come across the mailing list with any problems either. I am sure that this problem could have been solved. Perhaps before griping about the fact that you created more work for yourself you should have exhausted all options including the mailing list. That is all I am saying about the issue in order to ensure this thread does not degenerate to name calling. Jason Passow Mississippi Welders Supply [EMAIL PROTECTED] ph: (507) 494-5178 fax: (507) 454-8104 "If you do everything right, nobody will realize you've done anything at all." Stout, Josh wrote: > We ran into a problem with our SA6.x server where team entries failed to > produce an alert. When we added a user to the alert dialogue box the > system produced an alert. > > I removed all teams from the registry and added a new team. The new > team then successfully produced an alert. I am now faced with replacing > 46 teams on 367 servers. Not fun. > > Also, you should all be warned that we purchased an annual support > agreement for Servers Alive ($100/yr) and could not get any help with > our issue. So I wouldn't buy support from these guys if I were you. > > Josh Stout > > > > -----Original Message----- > From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On > Behalf Of [EMAIL PROTECTED] > Sent: Tuesday, February 19, 2008 10:56 AM > To: Servers Alive Discussion List > Subject: RE: [SA-list] MS Virtual Server checks > > I am currently running Servers Alive on a virtual machine running Server > 2003 Enterprise and have not had a single issue. > Also have Servers Alive checking all 120 of my virtual machines and that > has also worked great with no issues at all. > > > > > > Thanks, > Dave > > > > Dave Ashe > Hill-Rom IT Specialist > 1225 Crescent Green, Suite 200 > Cary NC 27518 > (919) 854-3255 > -----Original Message----- > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of > Barry > George > Sent: Tuesday, February 19, 2008 10:46 AM > To: [email protected] > Subject: RE: [SA-list] MS Virtual Server checks > > This is checking against a VM. Has anyone had any issues with running SA > as a VM? > I was about to install SA into a VM running V Server 2005 R2. > Thanks > > > > -----Original Message----- > From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On > Behalf Of Dirk Bulinckx > Sent: February 19, 2008 5:56 AM > To: Servers Alive Discussion List > Subject: [SA-list] MS Virtual Server checks > > We're currently working on an MS Virtual Server check, however due to > the way > that the MS APIs work is looks like the check will have some > limitations. > We would like to know if the SA system that would do the checks is > within the > same DOMAIN/FORREST as the system running the MS Virtual Server? > Also we would like to know if it a problem to have on a both the system > running > SA and the system running the virtual server a useraccount with the same > NAME > and PASSWORD. > > > (from the info we found now, it will be very hard, not to say impossible > to run > this type of check using the MS APIs when SA is running as service using > the > SYSTEM account). > > > > Dirk Bulinckx. > > To unsubscribe send a message with UNSUBSCRIBE as subject to > [email protected] > If you use auto-responders (like out-of-the-office messages), then make > sure that they are not send to the list nor to the individual members of > the list that send a message. Doing this will get you removed from the > list. > > To unsubscribe send a message with UNSUBSCRIBE as subject to > [email protected] > If you use auto-responders (like out-of-the-office messages), then make > sure that they are not send to the list nor to the individual members of > the list that send a message. Doing this will get you removed from the > list. > > To unsubscribe send a message with UNSUBSCRIBE as subject to > [email protected] > If you use auto-responders (like out-of-the-office messages), then make > sure that they are not send to the list nor to the individual members of > the list that send a message. Doing this will get you removed from the > list. > > To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] > If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. > > To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
