Will Do thanks -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Tuesday, January 29, 2008 10:41 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Trap Alerts Importance: High
can you retry this with the latest beta (as we did several small changes around the trap receiver) and if that still gives the problem, then contact me off-list. But then include more info like the real MIB file and also the trap you received and what info is missing. Dirk Bulinckx. From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Mark Bell Sent: Tuesday, January 29, 2008 4:31 PM To: Servers Alive Discussion List Subject: [SA-list] Trap Alerts Dirk, I have some SNMP Trap alerts setup on 6.1.2195 . I am not filtering any OID's I don't seem to be getting all the info in the trap. I have another SNMP trap receiver that does get all the info. Below is the received SA alert "Trap received from 10.12.1.5 trigger rule Host 1 With .iso.org.dod.internet.private.enterprises.intercall.iccProduct.isos.isos Software.isosSystemAlarm.isosLastSysAlarmSeverity=MajorAlarm .iso.org.dod.internet.private.enterprises.intercall.iccProduct.isos.isos Software.isosSystemAlarm.isosLastSysAlarmNodeNum=2 .iso.org.dod.internet.private.enterprises.intercall.iccProduct.isos.isos Software.isosSystemAlarm.isosLastSysAlarmSpanNum=95" This is a snip from the MIB of the info that is missing -- -- Span Alarms -- spanDead TRAP-TYPE ENTERPRISE intercall VARIABLES { isosLastSysAlarmSeverity, isosLastSysAlarmNodeNum, isosLastSysAlarmSpanNum } DESCRIPTION " Carrier Group Alarm (CGA) or span dead. " ::= 71 spanExcessiveSlips TRAP-TYPE ENTERPRISE intercall VARIABLES { isosLastSysAlarmSeverity, isosLastSysAlarmNodeNum, isosLastSysAlarmSpanNum } DESCRIPTION " Excessive Burst of Slips. " ::= 72 spanJ1Failure TRAP-TYPE ENTERPRISE intercall VARIABLES { isosLastSysAlarmSeverity, isosLastSysAlarmNodeNum, isosLastSysAlarmSpanNum } DESCRIPTION " J1-specific Failure. " ::= 73 To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
