If your printers are SNMP enabled then it's possible to monitor those options via SNMP The correct OIDs to use depend on the type of printer. Best is the get the MIB files for the printers and load them into a MIB browser (like Getif) and check for the OID of the setting you wish to monitor.
Dirk Bulinckx. -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Gilberto Soares Lopes Sent: Friday, June 29, 2007 6:21 PM To: Servers Alive Discussion List Subject: [SA-list] Monitoring printers Hi, i like monitoring printers in print server as the servers alive. Before install the external check (com) whats configure? I need monitoring failed, tonner down and status for prints in the print server. Thanks Hola, me gustaria monitorar todas las impresoras en un servidor de impresión para cuando tengamos fallos o tonner que estea acabando. Instalé el external check pero no sé como configuralo, alguien podria ayudarme, por favor. No encuentro nada que sea de impresora. Gracias MCDST / MCT -------------------------------------------------------------------------------- Conheça o Windows Live Spaces, a rede de relacionamentos conectada ao Messenger! Crie já o seu! (http://spaces.live.com/signup.aspx) To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
