I removed those three from my path and I'm still getting the same error: % echo $PATH
/opt/homebrew/bin:/opt/homebrew/sbin:/usr/local/bin:/System/Cryptexes/App/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin:/var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/local/bin:/var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/bin:/var/run/com.apple.security.cryptexd/codex.system/bootstrap/usr/appleinternal/bin:/Library/Apple/usr/bin I did source .homebrew-build-env before running ./configure. I installed the packages listed in the instructions. On Friday, October 18, 2024 at 4:48:51 PM UTC-4 dim...@gmail.com wrote: > The errors you have might be due to the use of pyenv (perhaps it's not > activated, but still it might be a problem). Specifically, in your > PATH you have > > PATH: /opt/homebrew/Cellar/pyenv-virtualenv/1.2.4/shims/ > PATH: /Users/jacksonwalters/.pyenv/shims/ > PATH: /Users/jacksonwalters/.pyenv/bin/ > PATH: /opt/homebrew/bin/ > PATH: /opt/homebrew/sbin/ > PATH: /usr/local/bin/ > PATH: /System/Cryptexes/App/usr/bin/ > > Please remove the first 3 entries from it, and try again. Please also > make sure you sourced > .homebrew-build-env before running ./configure, as explained in > macOS-specific docs. > > By the way, you can install more Homebrew packages to be used by Sage, > as you can see at the bottom of config.log (concrete lists of packages > are given there) > > > > > On Fri, Oct 18, 2024 at 8:51 PM Jackson Walters > <jackson...@gmail.com> wrote: > > > > Yes, attached. > > > > On Friday, October 18, 2024 at 3:43:14 PM UTC-4 dim...@gmail.com wrote: > >> > >> Hi, > >> could you post the top-level config.log > >> and logs/install.log ? > >> > >> Thanks. > >> > >> > >> > >> On 18 October 2024 20:19:13 BST, Jackson Walters <jackson...@gmail.com> > wrote: > >>> > >>> Hi all, > >>> > >>> I am making some changes to `symmetric_group_representations.py`, and > it would be useful to test them locally before committing them to a PR. I > haven't found it necessary to build Sage from source, but I'd like to now. > I am following the instructions in "Instructions to Build from Source" in > the README, installed the necessary prerequisites, and ran `./configure` > followed by `make`. > >>> > >>> Here is the traceback of the errors I'm getting: > >>> > >>>> [pip-24.0] Using cached file > /Users/jacksonwalters/Documents/GitHub/sage/upstream/pip-24.0-py3-none-any.whl > >>>> [pip-24.0] Setting up build directory > /Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4/var/tmp/sage/build/pip-24.0 > >>>> [pip-24.0] No stamp file for package 'pip' in > /Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4/var/lib/sage/installed > >>>> [pip-24.0] No spkg-legacy-uninstall script; nothing to do > >>>> [pip-24.0] [spkg-install] Staged wheel file, staged > /Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4/var/lib/sage/scripts/pip/spkg-requirements.txt > >>>> [pip-24.0] Moving package files from temporary location > /Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4/var/tmp/sage/build/pip-24.0/inst > > to > /Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4 > >>>> [pip-24.0] [spkg-pipinst] Traceback (most recent call last): > >>>> [pip-24.0] [spkg-pipinst] File > "/Users/jacksonwalters/Documents/GitHub/sage/build/bin/sage-flock", line > 23, in <module> > >>>> [pip-24.0] [spkg-pipinst] from sage_bootstrap.flock import run > >>>> [pip-24.0] [spkg-pipinst] File > "/Users/jacksonwalters/Documents/GitHub/sage/build/bin/../sage_bootstrap/flock.py", > > line 15, in <module> > >>>> [pip-24.0] [spkg-pipinst] import pipes > >>>> [pip-24.0] [spkg-pipinst] ModuleNotFoundError: No module named 'pipes' > >>>> [pip-24.0] [spkg-pipinst] Traceback (most recent call last): > >>>> [pip-24.0] [spkg-pipinst] File > "/Users/jacksonwalters/Documents/GitHub/sage/build/bin/sage-flock", line > 23, in <module> > >>>> [pip-24.0] [spkg-pipinst] from sage_bootstrap.flock import run > >>>> [pip-24.0] [spkg-pipinst] File > "/Users/jacksonwalters/Documents/GitHub/sage/build/bin/../sage_bootstrap/flock.py", > > line 15, in <module> > >>>> [pip-24.0] [spkg-pipinst] import pipes > >>>> [pip-24.0] [spkg-pipinst] ModuleNotFoundError: No module named 'pipes' > >>>> [pip-24.0] [spkg-pipinst] Warning: installing with "python3 -m pip > install --verbose --no-index > --find-links=/Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4/var/lib/sage/wheels > > --disable-pip-version-check --isolated --no-cache-dir" failed. Retrying, > adding "--no-deps --ignore-installed --ignore-requires-python" > >>>> [pip-24.0] [spkg-pipinst] Traceback (most recent call last): > >>>> [pip-24.0] [spkg-pipinst] File > "/Users/jacksonwalters/Documents/GitHub/sage/build/bin/sage-flock", line > 23, in <module> > >>>> [pip-24.0] [spkg-pipinst] from sage_bootstrap.flock import run > >>>> [pip-24.0] [spkg-pipinst] File > "/Users/jacksonwalters/Documents/GitHub/sage/build/bin/../sage_bootstrap/flock.py", > > line 15, in <module> > >>>> [pip-24.0] [spkg-pipinst] import pipes > >>>> [pip-24.0] [spkg-pipinst] ModuleNotFoundError: No module named 'pipes' > >>>> [pip-24.0] [spkg-pipinst] Error: installing with pip failed > >>>> [pip-24.0] [spkg-pipinst] > ******************************************************************************** > >>>> [pip-24.0] [spkg-pipinst] Error installing pip > >>>> [pip-24.0] [spkg-pipinst] > ******************************************************************************** > >>>> [pip-24.0] > ************************************************************************ > >>>> [pip-24.0] Error running the pipinst script for pip-24.0. > >>>> [pip-24.0] > ************************************************************************ > >>>> [pip-24.0] Please email sage-devel ( > http://groups.google.com/group/sage-devel) > >>>> [pip-24.0] explaining the problem and including the log files > >>>> [pip-24.0] > /Users/jacksonwalters/Documents/GitHub/sage/logs/pkgs/pip-24.0.log > >>>> [pip-24.0] and > >>>> [pip-24.0] /Users/jacksonwalters/Documents/GitHub/sage/config.log > >>>> [pip-24.0] Describe your computer, operating system, etc. > >>>> [pip-24.0] > ************************************************************************ > >>>> make[4]: *** [pip-SAGE_VENV-no-deps] Error 1 > >>>> make[3]: *** > [/Users/jacksonwalters/Documents/GitHub/sage/local/var/lib/sage/venv-python3.12.4/var/lib/sage/installed/pip-24.0] > > Error 2 > >>>> make[2]: *** [all-start] Error 2 > >>>> *************************************************************** > >>>> Error building Sage. > >>>> The following package(s) may have failed to build (not necessarily > >>>> during this run of 'make all-start'): > >>>> * package: m4ri-20200125 > >>>> last build time: Oct 17 15:01 > >>>> log file: > /Users/jacksonwalters/Documents/GitHub/sage/logs/pkgs/m4ri-20200125.log > >>>> build directory: > /Users/jacksonwalters/Documents/GitHub/sage/local/var/tmp/sage/build/m4ri-20200125 > >>>> * package: pip-24.0 > >>>> last build time: Oct 18 15:06 > >>>> log file: > /Users/jacksonwalters/Documents/GitHub/sage/logs/pkgs/pip-24.0.log > >>>> It is safe to delete any log files and build directories, but they > >>>> contain information that is helpful for debugging build problems. > >>>> WARNING: If you now run 'make' again, the build directory of the > >>>> same version of the package will, by default, be deleted. Set the > >>>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this. > >>>> real 2m41.391s user 1m45.773s sys 0m34.303s > >>>> make[1]: *** [all-start] Error 1 > >>>> make: *** [all] Error 2 > >>> > >>> Any help would be greatly appreciated. Thank you! > >>> > >>> Jackson > >>> > >>> > > -- > > You received this message because you are subscribed to the Google > Groups "sage-support" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-support...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-support/df9de397-ca8d-4feb-b28f-92bcb5feb780n%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "sage-support" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-support+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-support/39f7e6b6-674d-470c-9c92-6f51ad8457edn%40googlegroups.com.
