Hello, Ive tried a number of tricks with "configure flags", LDFLAGS, etc - trying to get Sage to build.
it "appears" the error 32 / 64 bit mismatching on the "ld" command. Source file used: sage-8.7.tar.gz To create log I posted here - I scrapped everything and did a completely fresh build using onle: 1) unpacking the gz archive 2) doing only "make" Any ideas ? ------------ >From file: ./local/var/tmp/sage/build/gcc-7.2.0/src/libgcc/configure configure:3471: /scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build/./gcc/xgcc -B/scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build/./gcc/ -B/scr/sage-8.7/local/x86_64-pc-linux-gnu/bin/ -B/scr/sage-8.7/local/x86_64-pc-linux-gnu/lib/ -isystem /scr/sage-8.7/local/x86_64-pc-linux-gnu/include -isystem /scr/sage-8.7/local/x86_64-pc-linux-gnu/sys-include -o conftest -g -O2 conftest.c >&5 /usr/lib/../lib/crt1.o: could not read symbols: File in wrong format collect2: error: ld returned 1 exit status In log file: /scr/sage-8.7/logs/pkgs/gcc-7.2.0.log [gcc-7.2.0] /bin/sh ../../../src/libgcc/../mkinstalldirs . [gcc-7.2.0] /scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build/./gcc/xgcc -B/scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build/./gcc/ -B/scr/sage-8.7/local/x86_64-pc-linux-gnu/bin/ -B/scr/sage-8.7/local/x86_64-pc-linux-gnu/lib/ -isystem /scr/sage-8.7/local/x86_64-pc-linux-gnu/include -isystem /scr/sage-8.7/local/x86_64-pc-linux-gnu/sys-include -O2 -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wno-format -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fpic -mlong-double-80 -DUSE_ELF_SYMVER -g -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -shared -nodefaultlibs -Wl,--soname=libgcc_s.so.1 -Wl,--version-script=libgcc.map -o ./libgcc_s.so.1.tmp -g -O2 -B./ _muldi3_s.o _negdi2_s.o _lshrdi3_s.o _ashldi3_s.o _ashrdi3_s.o _cmpdi2_s.o _ucmpdi2_s.o _clear_cache_s.o _trampoline_s.o __main_s.o _absvsi2_s.o _absvdi2_s.o _addvsi3_s.o _addvdi3_s.o _subvsi3_s.o _subvdi3_s.o _mulvsi3_s.o _mulvdi3_s.o _negvsi2_s.o _negvdi2_s.o _ctors_s.o _ffssi2_s.o _ffsdi2_s.o _clz_s.o _clzsi2_s.o _clzdi2_s.o _ctzsi2_s.o _ctzdi2_s.o _popcount_tab_s.o _popcountsi2_s.o _popcountdi2_s.o _paritysi2_s.o _paritydi2_s.o _powisf2_s.o _powidf2_s.o _powixf2_s.o _mulhc3_s.o _mulsc3_s.o _muldc3_s.o _mulxc3_s.o _divhc3_s.o _divsc3_s.o _divdc3_s.o _divxc3_s.o _bswapsi2_s.o _bswapdi2_s.o _clrsbsi2_s.o _clrsbdi2_s.o _fixunssfsi_s.o _fixunsdfsi_s.o _fixunsxfsi_s.o _fixsfdi_s.o _fixdfdi_s.o _fixxfdi_s.o _fixunssfdi_s.o _fixunsdfdi_s.o _fixunsxfdi_s.o _floatdisf_s.o _floatdidf_s.o _floatdixf_s.o _floatundisf_s.o _floatundidf_s.o _floatundixf_s.o _divdi3_s.o _moddi3_s.o _divmoddi4_s.o _udivdi3_s.o _umoddi3_s.o _udivmoddi4_s.o _udiv_w_sdiv_s.o cpuinfo_s.o sfp-exceptions_s.o addtf3_s.o divtf3_s.o multf3_s.o negtf2_s.o subtf3_s.o unordtf2_s.o fixtfsi_s.o fixunstfsi_s.o floatsitf_s.o floatunsitf_s.o fixtfdi_s.o fixunstfdi_s.o floatditf_s.o floatunditf_s.o fixtfti_s.o fixunstfti_s.o floattitf_s.o floatuntitf_s.o extendsftf2_s.o extenddftf2_s.o extendxftf2_s.o trunctfsf2_s.o trunctfdf2_s.o trunctfxf2_s.o getf2_s.o letf2_s.o eqtf2_s.o _divtc3_s.o _multc3_s.o _powitf2_s.o enable-execute-stack_s.o unwind-dw2_s.o unwind-dw2-fde-dip_s.o unwind-sjlj_s.o unwind-c_s.o emutls_s.o libgcc.a -lc && rm -f ./libgcc_s.so && if [ -f ./libgcc_s.so.1 ]; then mv -f ./libgcc_s.so.1 ./libgcc_s.so.1.backup; else true; fi && mv ./libgcc_s.so.1.tmp ./libgcc_s.so.1 && (echo "/* GNU ld script"; echo " Use the shared library, but some functions are only in"; echo " the static library. */"; echo "GROUP ( libgcc_s.so.1 -lgcc )" ) > ./libgcc_s.so [gcc-7.2.0] /usr/lib/../lib/crti.o: could not read symbols: File in wrong format [gcc-7.2.0] collect2: error: ld returned 1 exit status [gcc-7.2.0] make[6]: *** [libgcc_s.so] Error 1 [gcc-7.2.0] make[6]: Leaving directory `/scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build/x86_64-pc-linux-gnu/libgcc' [gcc-7.2.0] make[5]: *** [all-stage1-target-libgcc] Error 2 [gcc-7.2.0] make[5]: Leaving directory `/scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build' [gcc-7.2.0] make[4]: *** [stage1-bubble] Error 2 [gcc-7.2.0] make[4]: Leaving directory `/scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build' [gcc-7.2.0] make[3]: *** [all] Error 2 [gcc-7.2.0] make[3]: Leaving directory `/scr/sage-8.7/local/var/tmp/sage/build/gcc-7.2.0/gcc-build' -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To post to this group, send email to sage-devel@googlegroups.com. Visit this group at https://groups.google.com/group/sage-devel. For more options, visit https://groups.google.com/d/optout.
