I am building Sage from source as a user without root privileges. The
machine on which I am building Sage has the following specifications:
Red Hat Enterprise Linux Client release 5.2 (Tikanga)
4 X 1GHz Dual-Core AMD Opteron(tm) Processor 2220
32G RAM
.
In the "make" output, I'm seeing 68 instances of
/usr/local/lib/libpython2.6.a: could not read symbols: Bad value
. Shouldn't Sage ignore all pre-existing installs of Python?
Despite the 68 "Bad value" messages, the only portion of Sage that
does not successfully build is the Python Image Library
(pil-1.1.6.p2). At least, I have good reason to believe that this is
the only portion that fails to build, as the only test run by "make
test" that fails does so because of the condition "ImportError: No
module named Image":
=====
BEGIN: Relevant "make test" output.
=====
sage -t "devel/sage/sage/plot/plot3d/base.pyx"
**********************************************************************
File "/home/txbruser/TxBR/sage-4.4.3/devel/sage/sage/plot/plot3d/
base.pyx", line 1160:
sage: G.save(f)
Exception raised:
Traceback (most recent call last):
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1231, in run_one_test
self.run_one_example(test, example, filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/sagedoctest.py",
line 38, in run_one_example
OrigDocTestRunner.run_one_example(self, test, example,
filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1172, in run_one_example
compileflags, 1) in test.globs
File "<doctest __main__.example_35[4]>", line 1, in <module>
G.save(f)###line 1160:
sage: G.save(f)
File "base.pyx", line 1197, in
sage.plot.plot3d.base.Graphics3d.save (sage/plot/plot3d/base.c:11690)
ImportError: No module named Image
**********************************************************************
File "/home/txbruser/TxBR/sage-4.4.3/devel/sage/sage/plot/plot3d/
base.pyx", line 1165:
sage: G.save(f, zoom=2, figsize=[5, 10])
Exception raised:
Traceback (most recent call last):
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1231, in run_one_test
self.run_one_example(test, example, filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/sagedoctest.py",
line 38, in run_one_example
OrigDocTestRunner.run_one_example(self, test, example,
filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1172, in run_one_example
compileflags, 1) in test.globs
File "<doctest __main__.example_35[5]>", line 1, in <module>
G.save(f, zoom=Integer(2), figsize=[Integer(5),
Integer(10)])###line 1165:
sage: G.save(f, zoom=2, figsize=[5, 10])
File "base.pyx", line 1197, in
sage.plot.plot3d.base.Graphics3d.save (sage/plot/plot3d/base.c:11690)
ImportError: No module named Image
**********************************************************************
File "/home/txbruser/TxBR/sage-4.4.3/devel/sage/sage/plot/plot3d/
base.pyx", line 1170:
sage: G.save(f, viewer='jmol') # Looks the same
Exception raised:
Traceback (most recent call last):
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1231, in run_one_test
self.run_one_example(test, example, filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/sagedoctest.py",
line 38, in run_one_example
OrigDocTestRunner.run_one_example(self, test, example,
filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1172, in run_one_example
compileflags, 1) in test.globs
File "<doctest __main__.example_35[6]>", line 1, in <module>
G.save(f, viewer='jmol') # Looks the same###line 1170:
sage: G.save(f, viewer='jmol') # Looks the same
File "base.pyx", line 1197, in
sage.plot.plot3d.base.Graphics3d.save (sage/plot/plot3d/base.c:11690)
ImportError: No module named Image
**********************************************************************
File "/home/txbruser/TxBR/sage-4.4.3/devel/sage/sage/plot/plot3d/
base.pyx", line 1175:
sage: cube().save(tmp_filename() + '.gif')
Exception raised:
Traceback (most recent call last):
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1231, in run_one_test
self.run_one_example(test, example, filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/sagedoctest.py",
line 38, in run_one_example
OrigDocTestRunner.run_one_example(self, test, example,
filename, compileflags)
File "/home/txbruser/TxBR/sage-4.4.3/local/bin/ncadoctest.py",
line 1172, in run_one_example
compileflags, 1) in test.globs
File "<doctest __main__.example_35[7]>", line 1, in <module>
cube().save(tmp_filename() + '.gif')###line 1175:
sage: cube().save(tmp_filename() + '.gif')
File "base.pyx", line 1197, in
sage.plot.plot3d.base.Graphics3d.save (sage/plot/plot3d/base.c:11690)
ImportError: No module named Image
**********************************************************************
1 items had failures:
4 of 8 in __main__.example_35
***Test Failed*** 4 failures.
For whitespace errors, see the file /home/txbruser/.sage//
tmp/.doctest_base.py
[16.6 s]
=====
END: Relevant "make test" output.
=====
.
=====
BEGIN: Relevant "make" output.
=====
gcc -pthread -shared build/temp.linux-x86_64-2.6/_imaging.o build/
temp.linux-x86_64-2.6/decode.o build/temp.linux-x86_64-2.6/encode.o
build/temp.linux-x86_64-2.6/map.o build/temp.linux-x86_64-2.6/
display.o build/temp.linux-x86_64-2.6/outline.o build/temp.linux-
x86_64-2.6/path.o build/temp.linux-x86_64-2.6/libImaging/Access.o
build/temp.linux-x86_64-2.6/libImaging/Antialias.o build/temp.linux-
x86_64-2.6/libImaging/Bands.o build/temp.linux-x86_64-2.6/libImaging/
BitDecode.o build/temp.linux-x86_64-2.6/libImaging/Blend.o build/
temp.linux-x86_64-2.6/libImaging/Chops.o build/temp.linux-x86_64-2.6/
libImaging/Convert.o build/temp.linux-x86_64-2.6/libImaging/
ConvertYCbCr.o build/temp.linux-x86_64-2.6/libImaging/Copy.o build/
temp.linux-x86_64-2.6/libImaging/Crc32.o build/temp.linux-x86_64-2.6/
libImaging/Crop.o build/temp.linux-x86_64-2.6/libImaging/Dib.o build/
temp.linux-x86_64-2.6/libImaging/Draw.o build/temp.linux-x86_64-2.6/
libImaging/Effects.o build/temp.linux-x86_64-2.6/libImaging/
EpsEncode.o build/temp.linux-x86_64-2.6/libImaging/File.o build/
temp.linux-x86_64-2.6/libImaging/Fill.o build/temp.linux-x86_64-2.6/
libImaging/Filter.o build/temp.linux-x86_64-2.6/libImaging/FliDecode.o
build/temp.linux-x86_64-2.6/libImaging/Geometry.o build/temp.linux-
x86_64-2.6/libImaging/GetBBox.o build/temp.linux-x86_64-2.6/libImaging/
GifDecode.o build/temp.linux-x86_64-2.6/libImaging/GifEncode.o build/
temp.linux-x86_64-2.6/libImaging/HexDecode.o build/temp.linux-
x86_64-2.6/libImaging/Histo.o build/temp.linux-x86_64-2.6/libImaging/
JpegDecode.o build/temp.linux-x86_64-2.6/libImaging/JpegEncode.o build/
temp.linux-x86_64-2.6/libImaging/LzwDecode.o build/temp.linux-
x86_64-2.6/libImaging/Matrix.o build/temp.linux-x86_64-2.6/libImaging/
ModeFilter.o build/temp.linux-x86_64-2.6/libImaging/MspDecode.o build/
temp.linux-x86_64-2.6/libImaging/Negative.o build/temp.linux-
x86_64-2.6/libImaging/Offset.o build/temp.linux-x86_64-2.6/libImaging/
Pack.o build/temp.linux-x86_64-2.6/libImaging/PackDecode.o build/
temp.linux-x86_64-2.6/libImaging/Palette.o build/temp.linux-x86_64-2.6/
libImaging/Paste.o build/temp.linux-x86_64-2.6/libImaging/Quant.o
build/temp.linux-x86_64-2.6/libImaging/QuantHash.o build/temp.linux-
x86_64-2.6/libImaging/QuantHeap.o build/temp.linux-x86_64-2.6/
libImaging/PcdDecode.o build/temp.linux-x86_64-2.6/libImaging/
PcxDecode.o build/temp.linux-x86_64-2.6/libImaging/PcxEncode.o build/
temp.linux-x86_64-2.6/libImaging/Point.o build/temp.linux-x86_64-2.6/
libImaging/RankFilter.o build/temp.linux-x86_64-2.6/libImaging/
RawDecode.o build/temp.linux-x86_64-2.6/libImaging/RawEncode.o build/
temp.linux-x86_64-2.6/libImaging/Storage.o build/temp.linux-x86_64-2.6/
libImaging/SunRleDecode.o build/temp.linux-x86_64-2.6/libImaging/
TgaRleDecode.o build/temp.linux-x86_64-2.6/libImaging/Unpack.o build/
temp.linux-x86_64-2.6/libImaging/UnpackYCC.o build/temp.linux-
x86_64-2.6/libImaging/XbmDecode.o build/temp.linux-x86_64-2.6/
libImaging/XbmEncode.o build/temp.linux-x86_64-2.6/libImaging/
ZipDecode.o build/temp.linux-x86_64-2.6/libImaging/ZipEncode.o -L/usr/
local/lib -L/home/txbruser/TxBR/sage-4.4.3/local/lib -L/usr/lib -L/
home/txbruser/TxBR/sage-4.4.3/local/lib -ljpeg -lz -lpython2.6 -o
build/lib.linux-x86_64-2.6/_imaging.so
/usr/bin/ld: /usr/local/lib/libpython2.6.a(abstract.o): relocation
R_X86_64_32 against `a local symbol' can not be used when making a
shared object; recompile with -fPIC
/usr/local/lib/libpython2.6.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
error: command 'gcc' failed with exit status 1
Disabling TK in PIL build.
running install
running build
running build_py
running build_ext
building '_imaging' extension
gcc -pthread -shared build/temp.linux-x86_64-2.6/_imaging.o build/
temp.linux-x86_64-2.6/decode.o build/temp.linux-x86_64-2.6/encode.o
build/temp.linux-x86_64-2.6/map.o build/temp.linux-x86_64-2.6/
display.o build/temp.linux-x86_64-2.6/outline.o build/temp.linux-
x86_64-2.6/path.o build/temp.linux-x86_64-2.6/libImaging/Access.o
build/temp.linux-x86_64-2.6/libImaging/Antialias.o build/temp.linux-
x86_64-2.6/libImaging/Bands.o build/temp.linux-x86_64-2.6/libImaging/
BitDecode.o build/temp.linux-x86_64-2.6/libImaging/Blend.o build/
temp.linux-x86_64-2.6/libImaging/Chops.o build/temp.linux-x86_64-2.6/
libImaging/Convert.o build/temp.linux-x86_64-2.6/libImaging/
ConvertYCbCr.o build/temp.linux-x86_64-2.6/libImaging/Copy.o build/
temp.linux-x86_64-2.6/libImaging/Crc32.o build/temp.linux-x86_64-2.6/
libImaging/Crop.o build/temp.linux-x86_64-2.6/libImaging/Dib.o build/
temp.linux-x86_64-2.6/libImaging/Draw.o build/temp.linux-x86_64-2.6/
libImaging/Effects.o build/temp.linux-x86_64-2.6/libImaging/
EpsEncode.o build/temp.linux-x86_64-2.6/libImaging/File.o build/
temp.linux-x86_64-2.6/libImaging/Fill.o build/temp.linux-x86_64-2.6/
libImaging/Filter.o build/temp.linux-x86_64-2.6/libImaging/FliDecode.o
build/temp.linux-x86_64-2.6/libImaging/Geometry.o build/temp.linux-
x86_64-2.6/libImaging/GetBBox.o build/temp.linux-x86_64-2.6/libImaging/
GifDecode.o build/temp.linux-x86_64-2.6/libImaging/GifEncode.o build/
temp.linux-x86_64-2.6/libImaging/HexDecode.o build/temp.linux-
x86_64-2.6/libImaging/Histo.o build/temp.linux-x86_64-2.6/libImaging/
JpegDecode.o build/temp.linux-x86_64-2.6/libImaging/JpegEncode.o build/
temp.linux-x86_64-2.6/libImaging/LzwDecode.o build/temp.linux-
x86_64-2.6/libImaging/Matrix.o build/temp.linux-x86_64-2.6/libImaging/
ModeFilter.o build/temp.linux-x86_64-2.6/libImaging/MspDecode.o build/
temp.linux-x86_64-2.6/libImaging/Negative.o build/temp.linux-
x86_64-2.6/libImaging/Offset.o build/temp.linux-x86_64-2.6/libImaging/
Pack.o build/temp.linux-x86_64-2.6/libImaging/PackDecode.o build/
temp.linux-x86_64-2.6/libImaging/Palette.o build/temp.linux-x86_64-2.6/
libImaging/Paste.o build/temp.linux-x86_64-2.6/libImaging/Quant.o
build/temp.linux-x86_64-2.6/libImaging/QuantHash.o build/temp.linux-
x86_64-2.6/libImaging/QuantHeap.o build/temp.linux-x86_64-2.6/
libImaging/PcdDecode.o build/temp.linux-x86_64-2.6/libImaging/
PcxDecode.o build/temp.linux-x86_64-2.6/libImaging/PcxEncode.o build/
temp.linux-x86_64-2.6/libImaging/Point.o build/temp.linux-x86_64-2.6/
libImaging/RankFilter.o build/temp.linux-x86_64-2.6/libImaging/
RawDecode.o build/temp.linux-x86_64-2.6/libImaging/RawEncode.o build/
temp.linux-x86_64-2.6/libImaging/Storage.o build/temp.linux-x86_64-2.6/
libImaging/SunRleDecode.o build/temp.linux-x86_64-2.6/libImaging/
TgaRleDecode.o build/temp.linux-x86_64-2.6/libImaging/Unpack.o build/
temp.linux-x86_64-2.6/libImaging/UnpackYCC.o build/temp.linux-
x86_64-2.6/libImaging/XbmDecode.o build/temp.linux-x86_64-2.6/
libImaging/XbmEncode.o build/temp.linux-x86_64-2.6/libImaging/
ZipDecode.o build/temp.linux-x86_64-2.6/libImaging/ZipEncode.o -L/usr/
local/lib -L/home/txbruser/TxBR/sage-4.4.3/local/lib -L/usr/lib -L/
home/txbruser/TxBR/sage-4.4.3/local/lib -ljpeg -lz -lpython2.6 -o
build/lib.linux-x86_64-2.6/_imaging.so
/usr/bin/ld: /usr/local/lib/libpython2.6.a(abstract.o): relocation
R_X86_64_32 against `a local symbol' can not be used when making a
shared object; recompile with -fPIC
/usr/local/lib/libpython2.6.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
error: command 'gcc' failed with exit status 1
Error building PIL: 'Error installing PIL'
real 0m23.256s
user 0m19.309s
sys 0m3.000s
sage: An error occurred while installing pil-1.1.6.p2
Please email sage-devel http://groups.google.com/group/sage-devel
explaining the problem and send the relevant part of
of /home/txbruser/TxBR/sage-4.4.3/install.log. Describe your
computer, operating system, etc.
If you want to try to fix the problem yourself, *don't* just cd to
/home/txbruser/TxBR/sage-4.4.3/spkg/build/pil-1.1.6.p2 and type 'make
check' or whatever is appropriate.
Instead, the following commands setup all environment variables
correctly and load a subshell for you to debug the error:
(cd '/home/txbruser/TxBR/sage-4.4.3/spkg/build/pil-1.1.6.p2' && '/home/
txbruser/TxBR/sage-4.4.3/sage' -sh)
When you are done debugging, you can type "exit" to leave the
subshell.
make[1]: *** [installed/pil-1.1.6.p2] Error 1
make[1]: Leaving directory `/home/txbruser/TxBR/sage-4.4.3/spkg'
real 239m51.011s
user 188m40.200s
sys 33m22.676s
Error building Sage.
=====
END: Relevant "make" output.
=====
Thanks,
Alex
--
To post to this group, send an email to sage-devel@googlegroups.com
To unsubscribe from this group, send an email to
sage-devel+unsubscr...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/sage-devel
URL: http://www.sagemath.org
