On Mon, Dec 28, 2020 at 10:05 PM Sebastian Oehms <seb.oe...@gmail.com> wrote: > > https://gitlab.com/sagemath/dev/trac/-/pipelines
so docker build does some patching (why? I don't know) and there are failures (why? I don't know), and then an attempt to do something with these rejected patches fails: cf. e.g. https://gitlab.com/sagemath/dev/trac/-/jobs/935852462 patching file src/sage/combinat/crystals/star_crystal.py Reversed (or previously applied) patch detected! Assume -R? [n] Apply anyway? [n] Skipping patch. 1 out of 1 hunk ignored -- saving rejects to file src/sage/combinat/crystals/star_crystal.py.rej patching file src/sage/ext_data/doctest/rich_output/example.png patching file src/sage/ext_data/notebook-ipython/logo-64x64.png patching file src/sage/misc/element_with_label.py Reversed (or previously applied) patch detected! Assume -R? [n] Apply anyway? [n] Skipping patch. 1 out of 1 hunk ignored -- saving rejects to file src/sage/misc/element_with_label.py.rej patching file src/sage/rings/invariants/__init__.py Reversed (or previously applied) patch detected! Assume -R? [n] Apply anyway? [n] Skipping patch. 1 out of 1 hunk ignored -- saving rejects to file src/sage/rings/invariants/__init__.py.rej The command '/bin/sh -c patch -p1 < "$HOME"/sage-context.patch' returned a non-zero code: 1 Command exited with non-zero status 1 I guess it's because it's a new codepath (with these rejected patches) in docker/Dockerfile Over to Julian, I think. > > On Mon, Dec 28, 2020 at 11:02 PM Sebastian Oehms <seb.oe...@gmail.com> wrote: > > > > Thanks to you both for the hints! Yes, instead of develop I used the > > version tag directly. Running docker as you suggested solves the > > problem. But, the version tag works on a newer CPU (the one causing > > the crash was an i5 of the 2. generation), as well, and for 9.1.beta1 > > even on the older CPU. > > > > What about my second point concerning the trac ticket branches, I mean this? > > > > On Mon, Dec 28, 2020 at 9:49 PM Frédéric Chapoton <fchapot...@gmail.com> > > wrote: > > > > > > did you run > > > > > > docker run -it sagemath/sagemath-dev:develop > > > > > > or something else ? > > > > > > Le lundi 28 décembre 2020 à 12:45:20 UTC+1, seb....@gmail.com a écrit : > > >> > > >> It seems that there is still (or again) something broken. For the images > > >> of the beta releases since the 8th of December Sage crashes if I try to > > >> start it: > > >> > > >> Sage build/upgrade complete! > > >> make[1]: Leaving directory '/home/sage/sage' > > >> sage@8711c66abafe:~/sage$ ./sage > > >> ┌────────────────────────────────────────────────────────────────────┐ > > >> │ SageMath version 9.3.beta5, Release Date: 2020-12-27 │ > > >> │ Using Python 3.8.5. Type "help()" for help. │ > > >> └────────────────────────────────────────────────────────────────────┘ > > >> ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓ > > >> ┃ Warning: this is a prerelease version, and it may be unstable. ┃ > > >> ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛ > > >> ------------------------------------------------------------------------ > > >> /home/sage/sage/local/lib/python3.8/site-packages/cysignals/signals.cpython-38-x86_64-linux-gnu.so(+0x6b28)[0x7ff042b33b28] > > >> /home/sage/sage/local/lib/python3.8/site-packages/cysignals/signals.cpython-38-x86_64-linux-gnu.so(+0x6d08)[0x7ff042b33d08] > > >> /home/sage/sage/local/lib/python3.8/site-packages/cysignals/signals.cpython-38-x86_64-linux-gnu.so(+0x93a0)[0x7ff042b363a0] > > >> /lib/x86_64-linux-gnu/libpthread.so.0(+0x11390)[0x7ff0523f9390] > > >> /home/sage/sage/local/lib/libgmp.so.10(__gmpz_sizeinbase+0x47)[0x7ff049df0597] > > >> /home/sage/sage/local/lib/python3.8/site-packages/sage/rings/rational.cpython-38-x86_64-linux-gnu.so(+0x1f78c)[0x7ff036e2978c] > > >> /home/sage/sage/local/lib/python3.8/site-packages/sage/rings/rational.cpython-38-x86_64-linux-gnu.so(+0x370d5)[0x7ff036e410d5] > > >> ............ > > >> /home/sage/sage/local/lib/libpython3.8.so.1.0(+0x185260)[0x7ff05278a260] > > >> /home/sage/sage/local/lib/libpython3.8.so.1.0(PyRun_FileExFlags+0x95)[0x7ff05278cb45] > > >> /home/sage/sage/local/lib/libpython3.8.so.1.0(PyRun_SimpleFileExFlags+0xf6)[0x7ff05278ccb6] > > >> /home/sage/sage/local/lib/libpython3.8.so.1.0(Py_RunMain+0x748)[0x7ff0527a7398] > > >> /home/sage/sage/local/lib/libpython3.8.so.1.0(Py_BytesMain+0x39)[0x7ff0527a77c9] > > >> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7ff05203e840] > > >> python3(_start+0x29)[0x400709] > > >> ------------------------------------------------------------------------ > > >> Attaching gdb to process id 9075. > > >> Cannot find gdb installed > > >> GDB is not installed. > > >> Install gdb for enhanced tracebacks. > > >> ------------------------------------------------------------------------ > > >> Unhandled SIGILL: An illegal instruction occurred. > > >> This probably occurred because a *compiled* module has a bug > > >> in it and is not properly wrapped with sig_on(), sig_off(). > > >> Python will now terminate. > > >> ------------------------------------------------------------------------ > > >> Illegal instruction (core dumped) > > >> > > >> Furthermore, all pipelines on individual branches since that date failed. > > >> > > >> Frédéric Chapoton schrieb am Dienstag, 8. Dezember 2020 um 09:33:03 > > >> UTC+1: > > >>> > > >>> the build for 9.3.beta3 has passed successfully, so there should be a > > >>> docker for that, and a docker for develop that should point to the same. > > >>> > > >>> https://gitlab.com/sagemath/sage/-/pipelines > > >>> > > >>> Frédéric > > >>> > > >>> Le jeudi 15 octobre 2020 à 12:09:15 UTC+2, Sébastien Labbé a écrit : > > >>>> > > >>>> Bonjour, > > >>>> > > >>>> Thanks to Vincent, I learned recently how to use continuous > > >>>> integration in gitlab and the docker images of previous versions of > > >>>> sage posted https://hub.docker.com/r/sagemath/sagemath-dev/ in order > > >>>> to test that my optional package works with all those versions. It > > >>>> basically made me realize that my package was broken on most versions > > >>>> of sage except the most recent. And hopefully soon, I will be able to > > >>>> fix those issues. So thanks to those involved in having these various > > >>>> docker images available. > > >>>> > > >>>> For the curious, the most recent run is available here: > > >>>> https://gitlab.com/seblabbe/slabbe/-/pipelines/202932270 > > >>>> it shows that my package works for 9.1.rc5 but not 9.0 or earlier > > >>>> versions (I need to work on it). > > >>>> > > >>>> Unfortunately, it seems the docker images of various versions of sage > > >>>> are not uploaded since 4 months. Maybe it was too much energy to > > >>>> upload all beta versions there. In fact, I don't really need all beta > > >>>> in there. What I think is important to have are the final releases. > > >>>> With that respect, the following are missing: > > >>>> > > >>>> 8.6: ok > > >>>> 8.7: ok > > >>>> 8.8: ok > > >>>> 8.9 is missing or is broken > > >>>> 9.0 : ok > > >>>> 9.1 is missing (so I am using 9.1.rc5 and 9.1.rc5-py3) > > >>>> > > >>>> No 9.2.betaX are there, but I would be happy that 9.2 be there when > > >>>> released. > > >>>> > > >>>> Thanks to the people involved. > > >>>> > > >>>> Sincerely, > > >>>> > > >>>> Sébastien > > > > > > -- > > > You received this message because you are subscribed to a topic in the > > > Google Groups "sage-devel" group. > > > To unsubscribe from this topic, visit > > > https://groups.google.com/d/topic/sage-devel/Dbd4nFi8R7I/unsubscribe. > > > To unsubscribe from this group and all its topics, send an email to > > > sage-devel+unsubscr...@googlegroups.com. > > > To view this discussion on the web visit > > > https://groups.google.com/d/msgid/sage-devel/f00269b2-ce0d-4724-99b5-d8e97054679bn%40googlegroups.com. > > -- > You received this message because you are subscribed to the Google Groups > "sage-devel" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to sage-devel+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-devel/CAPEyD1D-p5x2MuB0K-7-Q88cAt0hzXYbovnrHh-tjH2_BVUtAA%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/CAAWYfq0cmoNAo6Ymf-0qd%2Bef8j%3D0rkt%2BUxk_z7aici8egHnvSg%40mail.gmail.com.
