# /usr/sbin/rsyslogd -N1 rsyslogd: version 8.2212.0, config validation run (level 1), master config /etc/rsyslog.conf rsyslogd: End of config validation run. Bye.
On Mon, Dec 12, 2022 at 2:09 PM David Lang <da...@lang.hm> wrote: > does rsyslogd -N1 report any issues? > > David Lang > > On Mon, 12 Dec 2022, helices wrote: > > > I just now restarted again, like this: > > > > # systemctl restart rsyslog > > > > We'll see overnight if that does the trick. > > > > > > # date; grep -v "^\(#\|\s*$\)" /etc/rsyslog.conf ;date > > Mon Dec 12 13:56:12 CST 2022 > > module(load="imjournal" Ratelimit.Burst="30000" Ratelimit.Interval="1000" > > StateFile="imjournal.state") > > module(load="imklog") > > module(load="immark") > > module(load="impstats" interval="600" severity="7") > > syslog.=debug /var/log/rsyslog-stats > > module(load="imtcp") > > input(type="imtcp" port="514") > > module(load="imudp") > > input(type="imudp" port="514") > > module(load="ommysql.so") > > global(workDirectory="/var/lib/rsyslog") > > authpriv.none;cron.none;*.info;mail.none /var/log/messages > > authpriv.* /var/log/secure > > cron.* /var/log/cron > > *.emerg :omusrmsg:* > > ftp.* /var/log/vsftpd.log > > local7.* /var/log/boot.log > > mail.* /var/log/maillog > > uucp,news.crit /var/log/spooler > > $ActionName Ftp > > $ActionQueueFileName dbFtpQueue # Set file name, also enables disk mode > > $ActionQueueSaveOnShutdown on # Save messages to disk on shutdown > > $ActionQueueType LinkedList # Use asynchronous processing > > $ActionResumeRetryCount -1 # Infinite retries on insert failure > > ftp.* > > :ommysql:10.199.5.177,vsftplog,hermesvsftplog,_____ > > $ActionName Sftp > > $ActionQueueFileName dbSftpQueue # Set file name, also enables disk > mode > > $ActionQueueSaveOnShutdown on # Save messages to disk on shutdown > > $ActionQueueType LinkedList # Use asynchronous processing > > $ActionResumeRetryCount -1 # Infinite retries on insert failure > > authpriv.* > > :ommysql:10.199.5.177,sftplogDB,hermesvsftplog,_____ > > $ActionName Admin > > $ActionQueueFileName ZenossQueue # Set file name, also enables disk mode > > $ActionQueueSaveOnShutdown on # Save messages to disk on shutdown > > $ActionQueueType LinkedList # Use asynchronous processing > > $ActionResumeRetryCount -1 # Infinite retries on insert failure > > *.* @@10.199.1.160 > > Mon Dec 12 13:56:12 CST 2022 > > > > On Mon, Dec 12, 2022 at 1:34 PM David Lang <da...@lang.hm> wrote: > > > >> did you do a full restart after making the change? can you show the full > >> config? > >> > >> the messages you are showing are saying taht the config line you show > >> isn't > >> being used. > >> > >> David Lang > >> > >> On Mon, 12 Dec 2022, helices via rsyslog wrote: > >> > >>> Date: Mon, 12 Dec 2022 12:39:54 -0600 > >>> From: helices via rsyslog <rsyslog@lists.adiscon.com> > >>> To: Rainer Gerhards <rgerha...@hq.adiscon.com> > >>> Cc: helices <mike+rsys...@mdsresource.net>, > >>> rsyslog-users <rsyslog@lists.adiscon.com> > >>> Subject: Re: [rsyslog] Rsyslogd/ommysql.so: Not writing to DB > >> intermittently > >>> > >>> We're still missing something: > >>> > >>> module(load="imjournal" Ratelimit.Burst="30000" > Ratelimit.Interval="1000" > >>> StateFile="imjournal.state") > >>> > >>> > >>> 2022-12-12T00:53:14.001626-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1728 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:20.004006-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1818 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:26.003870-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1794 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:32.005388-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1797 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:38.001367-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1812 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:44.006085-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1791 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:50.005487-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1797 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:53:56.001546-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1808 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> 2022-12-12T00:54:02.007743-06:00 hermes rsyslogd[1536]: > >>> rsyslogd[internal_messages]: 1759 messages lost due to rate-limiting > (500 > >>> allowed within 5 seconds) > >>> > >>> > >>> What are we missing? > >>> > >>> Please, advise. Thank you. > >>> > >>> > >>> On Fri, Dec 9, 2022 at 8:49 AM Rainer Gerhards < > rgerha...@hq.adiscon.com > >>> > >>> wrote: > >>> > >>>> you set the interval, but not ratelimit.burst > >>>> > >>>> doc: > >>>> > >> > https://www.rsyslog.com/doc/v8-stable/configuration/modules/imjournal.html > >>>> > >>>> Rainer > >>>> > >>>> El mar, 6 dic 2022 a las 15:16, helices via rsyslog > >>>> (<rsyslog@lists.adiscon.com>) escribió: > >>>>> > >>>>> David, > >>>>> > >>>>> What am I doing wrong? > >>>>> > >>>>> module(load="imjournal" Ratelimit.Interval="10000" > >>>>> StateFile="imjournal.state") > >>>>> > >>>>> 2022-12-06T07:19:26.004772-06:00 hermes rsyslogd[29735]: > >>>>> rsyslogd[internal_messages]: 1755 messages lost due to rate-limiting > >> (500 > >>>>> allowed within 5 seconds) > >>>>> > >>>>> Please, advise. Thank you. > >>>>> > >>>>> ~ Mike > >>>>> > >>>>> > >>>>> > >>>>> On Thu, Dec 1, 2022 at 3:12 PM David Lang <da...@lang.hm> wrote: > >>>>> > >>>>>> On Thu, 1 Dec 2022, helices wrote: > >>>>>> > >>>>>>> [1] What is "action() syntax?" Which lines ought to be converted? > >>>> How? > >>>>>> > >>>>>> > >>>>>> > >>>> > >> > https://www.rsyslog.com/doc/master/configuration/basic_structure.html#statement-types > >>>>>> > >>>>>> instead of > >>>>>> > >>>>>> @@10.0.0.1 > >>>>>> > >>>>>> you would do > >>>>>> > >>>>>> action(type="omfwd" target="10.0.0.1" port="514" protocol="tcp") > >>>>>> > >>>>>> for this trivial example, the earlier syntax makes more sense, but > >> when > >>>>>> you have > >>>>>> more complex things (like the queues that you have), adding them all > >>>> into > >>>>>> the > >>>>>> action makes it clearer exactly what is happening > >>>>>> > >>>>>> > >>>>>> so you currently have > >>>>>> > >>>>>>>>> $ActionName Admin > >>>>>>>>> $ActionQueueDequeueSlowdown 1000 # How long (in microseconds) > >>>>>> dequeueing > >>>>>>>>> should be delayed > >>>>>>>>> $ActionQueueFileName ZenossQueue # Set file name, also enables > >>>> disk > >>>>>> mode > >>>>>>>>> $ActionQueueSaveOnShutdown on # Save messages to disk on > >>>> shutdown > >>>>>>>>> $ActionQueueType LinkedList # Use asynchronous processing > >>>>>>>>> $ActionResumeRetryCount -1 # Infinite retries on insert > >>>> failure > >>>>>>>>> *.* @@10.199.1.160 > >>>>>> > >>>>>> > >>>>>> This would be > >>>>>> > >>>>>> action(name="Admin" type="omfwd" target="10.199.1.160" > >> protocol="tcp" > >>>>>> queue.filename="ZenossQueue" queue.saveonshutdown="on" > >>>>>> queue.type="linkedlist" > >>>>>> resumeretrycount="-1" queue.dequeueslowdown="1000") > >>>>>> > >>>>>> this makes it very clear that all these parameters apply only to > >> this > >>>>>> action > >>>>>> (which is what the old syntax does, but it's less obvious to people > >>>> that > >>>>>> it only > >>>>>> applies to the next action) > >>>>>> > >>>>>>> [2] Where is the "pause" you mention? I don't recognize that. > >>>>>> > >>>>>> $ActionQueueDequeueSlowdown 1000 # How long (in microseconds) > >>>> dequeueing > >>>>>> > >>>>>> This tells rsyslog to pause after each batch of messages before > >>>> processing > >>>>>> the > >>>>>> next batch. > >>>>>> > >>>>>>> [3] impstats? Permanently? Only for this debugging? > >>>>>> > >>>>>> I like to have it on permanently, but especially for debugging it > >>>> provides > >>>>>> a lot > >>>>>> of useful info > >>>>>> > >>>>>>> [4] How to modify imjournal rate limits? > >>>>>> > >>>>>> see > >>>>>> > >>>> > >> > https://www.rsyslog.com/doc/v8-stable/configuration/modules/imjournal.html > >>>>>> > >>>>>>> [5] RSYSLOG_DebugFormat? I found this: > >>>>>>> > >> https://www.rsyslog.com/doc/v8-stable/configuration/templates.html > >>>> - Is > >>>>>>> that example proper by itself? Where does this template go? How > >> can I > >>>>>>> specify the file and location for debugging? > >>>>>> > >>>>>> as I said below > >>>>>> > >>>>>>>> ftp.* /var/log/ftp;RSYSLOG_DebugFormat (legacy format, add > >>>>>> template="RSYSLOG_DebugFormat" to that action() format) > >>>>>> > >>>>>>> If there are URLs to inform me, I appreciate your direction. > >>>>>> > >>>>>> > >>>> > >> > https://www.rsyslog.com/doc/v8-stable/configuration/modules/imjournal.html > >>>>>> > >>>> > >> > https://www.rsyslog.com/doc/v8-stable/configuration/modules/ommysql.html > >>>>>> > >> https://www.rsyslog.com/doc/v8-stable/configuration/modules/omfwd.html > >>>>>> https://www.rsyslog.com/doc/master/configuration/actions.html > >>>>>> > >> https://www.rsyslog.com/doc/master/rainerscript/queue_parameters.html > >>>>>> > >>>> > https://www.rsyslog.com/doc/v8-stable/configuration/modules/omfile.html > >>>>>> > >>>>>> feel free to keep asking questions. > >>>>>> > >>>>>> David Lang > >>>>>> > >>>>>> > >>>>>>> ~ Mike > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> On Thu, Dec 1, 2022 at 1:33 PM David Lang <da...@lang.hm> wrote: > >>>>>>> > >>>>>>>> it would be useful to convert to the action() syntax as it makes > >> it > >>>>>>>> clearer > >>>>>>>> what's happening. > >>>>>>>> > >>>>>>>> Why are you pausing between writing logs? (this could be why you > >> are > >>>>>>>> dropping > >>>>>>>> logs) > >>>>>>>> > >>>>>>>> given the number of queues and actions, look at configuring > >>>> impstats so > >>>>>>>> that you > >>>>>>>> can see the number of messages in the queues, number processed, > >> etc. > >>>>>>>> > >>>>>>>> imjournal defaults to some fairly aggressive rate limiting, I > >> find > >>>> that > >>>>>> I > >>>>>>>> always > >>>>>>>> need to drastically increase the limits. > >>>>>>>> > >>>>>>>> writing logs using the RSYSLOG_DebugFormat is adding the template > >>>> to the > >>>>>>>> file > >>>>>>>> > >>>>>>>> ftp.* /var/log/ftp;RSYSLOG_DebugFormat (legacy format, add > >>>>>>>> template="RSYSLOG_DebugFormat" to that action() format) > >>>>>>>> > >>>>>>>> the debug format is large, but you really need to see the message > >>>> that's > >>>>>>>> failing > >>>>>>>> to figure out why it's failing. The MySQL logs may give you > >> better > >>>> info > >>>>>> on > >>>>>>>> that. > >>>>>>>> > >>>>>>>> David Lang > >>>>>>>> > >>>>>>>> On Thu, 1 Dec 2022, helices wrote: > >>>>>>>> > >>>>>>>>> Date: Thu, 1 Dec 2022 13:26:47 -0600 > >>>>>>>>> From: helices <mike+rsys...@mdsresource.net> > >>>>>>>>> To: David Lang <da...@lang.hm> > >>>>>>>>> Cc: helices via rsyslog <rsyslog@lists.adiscon.com> > >>>>>>>>> Subject: Re: [rsyslog] Rsyslogd/ommysql.so: Not writing to DB > >>>>>>>> intermittently > >>>>>>>>> > >>>>>>>>> Thank you. > >>>>>>>>> > >>>>>>>>> [1] rsyslog.conf > >>>>>>>>> > >>>>>>>>> # date; grep -v "^\(#\|\s*$\)" /etc/rsyslog.conf ;date > >>>>>>>>> Thu Dec 1 13:19:34 CST 2022 > >>>>>>>>> module(load="imjournal" StateFile="imjournal.state") > >>>>>>>>> module(load="imklog") > >>>>>>>>> module(load="immark") > >>>>>>>>> module(load="impstats" interval="600" severity="7") > >>>>>>>>> syslog.=debug /var/log/rsyslog-stats > >>>>>>>>> module(load="imtcp") > >>>>>>>>> input(type="imtcp" port="514") > >>>>>>>>> module(load="imudp") > >>>>>>>>> input(type="imudp" port="514") > >>>>>>>>> module(load="ommysql.so") > >>>>>>>>> global(workDirectory="/var/lib/rsyslog") > >>>>>>>>> authpriv.none;cron.none;*.info;mail.none /var/log/messages > >>>>>>>>> authpriv.* /var/log/secure > >>>>>>>>> cron.* /var/log/cron > >>>>>>>>> *.emerg :omusrmsg:* > >>>>>>>>> ftp.* /var/log/vsftpd.log > >>>>>>>>> local7.* /var/log/boot.log > >>>>>>>>> mail.* /var/log/maillog > >>>>>>>>> uucp,news.crit /var/log/spooler > >>>>>>>>> $ActionName Ftp > >>>>>>>>> $ActionQueueDequeueSlowdown 1000 # How long (in microseconds) > >>>>>> dequeueing > >>>>>>>>> should be delayed > >>>>>>>>> $ActionQueueFileName dbFtpQueue # Set file name, also enables > >>>> disk > >>>>>> mode > >>>>>>>>> $ActionQueueSaveOnShutdown on # Save messages to disk on > >>>> shutdown > >>>>>>>>> $ActionQueueType LinkedList # Use asynchronous processing > >>>>>>>>> $ActionResumeRetryCount -1 # Infinite retries on insert > >>>> failure > >>>>>>>>> ftp.* > >>>>>>>>> :ommysql:10.199.5.177,vsftplog,hermesvsftplog,_____ > >>>>>>>>> $ActionName Sftp > >>>>>>>>> $ActionQueueDequeueSlowdown 1000 # How long (in microseconds) > >>>>>>>> dequeueing > >>>>>>>>> should be delayed > >>>>>>>>> $ActionQueueFileName dbSftpQueue # Set file name, also enables > >>>> disk > >>>>>>>> mode > >>>>>>>>> $ActionQueueSaveOnShutdown on # Save messages to disk on > >>>> shutdown > >>>>>>>>> $ActionQueueType LinkedList # Use asynchronous processing > >>>>>>>>> $ActionResumeRetryCount -1 # Infinite retries on insert > >>>> failure > >>>>>>>>> authpriv.* > >>>>>>>>> :ommysql:10.199.5.177,sftplogDB,hermesvsftplog,_____ > >>>>>>>>> $ActionName Admin > >>>>>>>>> $ActionQueueDequeueSlowdown 1000 # How long (in microseconds) > >>>>>> dequeueing > >>>>>>>>> should be delayed > >>>>>>>>> $ActionQueueFileName ZenossQueue # Set file name, also enables > >>>> disk > >>>>>> mode > >>>>>>>>> $ActionQueueSaveOnShutdown on # Save messages to disk on > >>>> shutdown > >>>>>>>>> $ActionQueueType LinkedList # Use asynchronous processing > >>>>>>>>> $ActionResumeRetryCount -1 # Infinite retries on insert > >>>> failure > >>>>>>>>> *.* @@10.199.1.160 > >>>>>>>>> Thu Dec 1 13:19:34 CST 2022 > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> [2] How do we "log the message with the template > >>>> RSYSLOG_DebugFormat > >>>>>> to a > >>>>>>>>> file?" How much disk space is needed? This problem appears to > >> have > >>>>>>>> started > >>>>>>>>> recently, and appears to happen once or twice per day, without a > >>>> common > >>>>>>>>> time. > >>>>>>>>> > >>>>>>>>> [3] I didn't notice the rate-limiting until now. It is not > >>>> uncommon. > >>>>>> How > >>>>>>>>> can we avoid losing so many messages? > >>>>>>>>> > >>>>>>>>> ~ Mike > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> On Thu, Dec 1, 2022 at 1:05 PM David Lang <da...@lang.hm> > >> wrote: > >>>>>>>>> > >>>>>>>>>> please post your full config. > >>>>>>>>>> > >>>>>>>>>> It would also help to log the message with the template > >>>>>>>>>> RSYSLOG_DebugFormat to a > >>>>>>>>>> file and find the log entry that is failing to insert. > >>>>>>>>>> > >>>>>>>>>> my guess is that the quotes in the message are confusing mysql > >>>>>>>>>> > >>>>>>>>>> note that rate limiting is throwing away messages because you > >> are > >>>>>> trying > >>>>>>>>>> to > >>>>>>>>>> process them too fast. > >>>>>>>>>> > >>>>>>>>>> David Lang > >>>>>>>>>> > >>>>>>>>>> On Thu, 1 Dec 2022, helices via rsyslog wrote: > >>>>>>>>>> > >>>>>>>>>>> Date: Thu, 1 Dec 2022 10:08:01 -0600 > >>>>>>>>>>> From: helices via rsyslog <rsyslog@lists.adiscon.com> > >>>>>>>>>>> To: rsyslog-users <rsyslog@lists.adiscon.com> > >>>>>>>>>>> Cc: helices <mike+rsys...@mdsresource.net> > >>>>>>>>>>> Subject: [rsyslog] Rsyslogd/ommysql.so: Not writing to DB > >>>>>>>> intermittently > >>>>>>>>>>> > >>>>>>>>>>> # date; /bin/yum list rsyslog rsyslog-mysql ;date > >>>>>>>>>>> Thu Dec 1 09:47:18 CST 2022 > >>>>>>>>>>> Loaded plugins: fastestmirror > >>>>>>>>>>> Loading mirror speeds from cached hostfile > >>>>>>>>>>> * base: download.cf.centos.org > >>>>>>>>>>> * epel: mirror.genesisadaptive.com > >>>>>>>>>>> * extras: download.cf.centos.org > >>>>>>>>>>> * remi-php56: mirror.pit.teraswitch.com > >>>>>>>>>>> * remi-safe: mirror.pit.teraswitch.com > >>>>>>>>>>> * updates: download.cf.centos.org > >>>>>>>>>>> Installed Packages > >>>>>>>>>>> rsyslog.x86_64 > >>>>>> 8.2210.0-1.el7 > >>>>>>>>>>> @rsyslog_v8 > >>>>>>>>>>> rsyslog-mysql.x86_64 > >>>>>> 8.2210.0-1.el7 > >>>>>>>>>>> @rsyslog_v8 > >>>>>>>>>>> Thu Dec 1 09:47:19 CST 2022 > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> Sample of numerous error messages (/var/log/messages): > >>>>>>>>>>> rsyslogd[17344]: ommysql: db error (1172): Result consisted of > >>>> more > >>>>>>>> than > >>>>>>>>>>> one row [v8.2210.0] > >>>>>>>>>>> rsyslogd[17344]: The error statement was: insert into > >>>> SystemEvents > >>>>>>>>>>> (Message, Facility, FromHost, Priority, DeviceReportedTime, > >>>>>> ReceivedAt, > >>>>>>>>>>> InfoUnitID, SysLogTag) values ('close > >>>>>>>>>>> "/incoming/wood.pgez.scen.11302022.sa.pgp" bytes read 0 > >> written > >>>> 2603 > >>>>>>>>>>> [postauth]', 10, 'hermes', 6, '20221201081257', > >>>> '20221201081257', 1, > >>>>>>>>>>> 'sshd[19654]:') [v8.2210.0 try https://www.rsyslog.com/e/2218 > >> ] > >>>>>>>>>>> rsyslogd[17344]: rsyslogd[internal_messages]: 215 messages > >> lost > >>>> due > >>>>>> to > >>>>>>>>>>> rate-limiting (500 allowed within 5 seconds) > >>>>>>>>>>> rsyslogd[17344]: action 'Sftp' (module 'ommysql.so') message > >>>> lost, > >>>>>>>> could > >>>>>>>>>>> not be processed. Check for additional error messages before > >> this > >>>>>> one. > >>>>>>>>>>> [v8.2210.0 try https://www.rsyslog.com/e/2218 ] > >>>>>>>>>>> > >>>>>>>>>>> > >>>>>>>>>>> We have been writing all data from Internet file transfers to > >> a > >>>> Mysql > >>>>>>>>>> table > >>>>>>>>>>> for years. Recently, we began seeing intermittent errors like > >>>> those > >>>>>>>>>> above. > >>>>>>>>>>> > >>>>>>>>>>> What is happening here? > >>>>>>>>>>> > >>>>>>>>>>> What can we do to fix this problem? > >>>>>>>>>>> > >>>>>>>>>>> Please, advise. Thank you. > >>>>>>>>>>> > >>>>>>>>>>> ~ Mike > >>>>>>>>>>> _______________________________________________ > >>>>>>>>>>> rsyslog mailing list > >>>>>>>>>>> https://lists.adiscon.net/mailman/listinfo/rsyslog > >>>>>>>>>>> http://www.rsyslog.com/professional-services/ > >>>>>>>>>>> What's up with rsyslog? Follow https://twitter.com/rgerhards > >>>>>>>>>>> NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED > >> by a > >>>>>>>> myriad > >>>>>>>>>> of sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST > >>>> if you > >>>>>>>>>> DON'T LIKE THAT. > >>>>>>>>>>> > >>>>>>>>>> > >>>>>>>>> > >>>>>>>> > >>>>>>> > >>>>>> > >>>>> _______________________________________________ > >>>>> rsyslog mailing list > >>>>> https://lists.adiscon.net/mailman/listinfo/rsyslog > >>>>> http://www.rsyslog.com/professional-services/ > >>>>> What's up with rsyslog? Follow https://twitter.com/rgerhards > >>>>> NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a > >> myriad > >>>> of sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you > >>>> DON'T LIKE THAT. > >>>> > >>> _______________________________________________ > >>> rsyslog mailing list > >>> https://lists.adiscon.net/mailman/listinfo/rsyslog > >>> http://www.rsyslog.com/professional-services/ > >>> What's up with rsyslog? Follow https://twitter.com/rgerhards > >>> NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a > myriad > >> of sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you > >> DON'T LIKE THAT. > > _______________________________________________ rsyslog mailing list https://lists.adiscon.net/mailman/listinfo/rsyslog http://www.rsyslog.com/professional-services/ What's up with rsyslog? Follow https://twitter.com/rgerhards NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a myriad of sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you DON'T LIKE THAT.
