What would you think if I told you that using Windows I no longer had that problem ? Would you still think that there are hardware problems ? And if so, why would they only manifest themselves using Linux and FreeBSD and not using Windows?
On Mon, Dec 23, 2024 at 9:38 PM Robin Lee Powell < rlpow...@digitalkingdom.org> wrote: > Then you get to look at other hardware; CPU, RAM, motherboard. But > it's almost certainly a hardware problem. Start with a RAM test, > those are pretty easy, but given the error, mobo is more likely IMO. > > On Mon, Dec 23, 2024 at 07:05:37PM +0100, Mario Marietto wrote: > > And I forgot to mention that I see the error even when trying to transfer > > files from and to a new disk,not an USB disk,bought some days ago,model > > Crucial BX500 SATA SSD 480GB,SSD. So,I'm not able to believe that even > this > > disk is damaged. This is a very strange situation. > > > > > > > > On Mon, Dec 23, 2024 at 7:00 PM Mario Marietto <marietto2...@gmail.com> > > wrote: > > > > > >Almost certainly your drive is going bad. On Linux I'd tell you to > check > > > dmesg for drive errors, I don't know what the FreeBSD > > > equivalent is. But I strongly recommend that you treat that drive as > > > "going to fail any second". > > > > > > I'm not sure that this is the reason. I see the error regardless of the > > > USB disks that I use. And I have a lot of USB disks,10 disks. > > > No,I don't see disk errors on dmesg. I see the errors on Linux and > > > FreeBSD. Don't know if I see them also using Windows. > > > Now I'm trying to transfer some files using Windows 11 because I want > to > > > exclude some variables from the equation. > > > > > > On Mon, Dec 23, 2024 at 7:49 PM Robin Lee Powell < > > > rlpow...@digitalkingdom.org> wrote: > > > > > >> Almost certainly your drive is going bad. On Linux I'd tell you to > > >> check dmesg for drive errors, I don't know what the FreeBSD > > >> equivalent is. But I strongly recommend that you treat that drive > > >> as "going to fail any second". > > >> > > >> On Mon, Dec 23, 2024 at 12:56:09PM +0100, Mario Marietto via rsync > wrote: > > >> > Using the parameters below the file hasn't been removed at 100% > even if > > >> I > > >> > got the same error : > > >> > > > >> > root@Z390-AORUS-PRO-DEST:/mnt/zroot-133/A_FILES/Backup/FreeBSD# > rsync > > >> > --inplace --append --partial Free > > >> > BSD-141-UFS-sdc-DarkMatter.img /mnt/sdj1/OS/Backup/BSD/FreeBSD > > >> > > > >> > rsync: [sender] read errors mapping > > >> > "/mnt/zroot-133/A_FILES/Backup/FreeBSD/FreeBSD-141-UFS-sdc-DarkMatt > > >> > er.img": Input/output error (5) > > >> > ^Crsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at > > >> > rsync.c(701) [sender=3.2.4dev] > > >> > rsync error: received SIGUSR1 (code 19) at main.c(1598) > > >> [generator=3.2.4dev] > > >> > > > >> > Can I know the reasons why I get those errors ? > > >> > > > >> > On Mon, Dec 23, 2024 at 11:30 AM Mario Marietto < > marietto2...@gmail.com > > >> > > > >> > wrote: > > >> > > > >> > > Happened again : > > >> > > > > >> > > root@Z390-AORUS-PRO-DEST:/mnt/zroot-133/A_FILES/Backup/FreeBSD# > sudo > > >> > > rsync -azvvP FreeBSD-141-UFS-sdc-DarkMatter.img > > >> > > /mnt/sdj1/OS/Backup/BSD/FreeBSD > > >> > > sending incremental file list > > >> > > delta-transmission disabled for local transfer or --whole-file > > >> > > FreeBSD-141-UFS-sdc-DarkMatter.img > > >> > > 320,072,933,376 *100%* 80.31MB/s 1:03:20 (xfr#1, to-chk=0/1) > > >> > > > > >> > > rsync: [sender] read errors mapping > > >> > > > "/mnt/zroot-133/A_FILES/Backup/FreeBSD/FreeBSD-141-UFS-sdc-DarkMatt > > >> > > er.img": Input/output error (5) > > >> > > > > >> > > WARNING: FreeBSD-141-UFS-sdc-DarkMatter.img failed verification -- > > >> update > > >> > > discarded (will try again). > > >> > > FreeBSD-141-UFS-sdc-DarkMatter.img > > >> > > 2,391,146,496 0% 183.65MB/s 0:28:09 ^C > > >> > > > > >> > > > > >> > > > > >> > > On Mon, Dec 23, 2024 at 11:14 AM Mario Marietto < > > >> marietto2...@gmail.com> > > >> > > wrote: > > >> > > > > >> > >> >As it's just a single file you're trying to copy, why not use > cp? > > >> > >> >Although I expect that cp will also throw an IO error at some > point. > > >> > >> > > >> > >> Yes,I tried cp and I got the same error,that usually happens > before > > >> > >> rsync,that is able to complete the transfer until 99%. > > >> > >> I've detached and reattached the USB disks,but I still see the > error. > > >> > >> > > >> > >> On Mon, Dec 23, 2024 at 11:07 AM Paul Slootman via rsync < > > >> > >> rsync@lists.samba.org> wrote: > > >> > >> > > >> > >>> On Mon 23 Dec 2024, Mario Marietto via rsync wrote: > > >> > >>> > > > >> > >>> > Everytime I try to copy a file from one USB disk to another > one > > >> (does > > >> > >>> not > > >> > >>> > matter which one),I get this kind of error : > > >> > >>> > > > >> > >>> > > > >> > >>> > mario@Z390-AORUS-PRO-DEST > :/mnt/zroot-133/A_FILES/Backup/FreeBSD# > > >> rsync > > >> > >>> > -avxHAXP FreeBSD-141-UFS-sdc-DarkMatter.img > > >> > >>> > /mnt/sdj1/OS/Backup/BSD/FreeBSD --ignore-existing > > >> > >>> > > > >> > >>> > sending incremental file list > > >> > >>> > FreeBSD-141-UFS-sdc-DarkMatter.img > > >> > >>> > > > >> > >>> > 320,072,933,376 100% 83.57MB/s 1:00:52 (xfr#1, > to-chk=0/1) > > >> > >>> > rsync: [sender] read errors mapping > > >> > >>> > > > >> > >>> > > >> > "/mnt/zroot-133/A_FILES/Backup/FreeBSD/FreeBSD-141-UFS-sdc-DarkMatter.img": > > >> > >>> > Input/output error (5) > > >> > >>> > > >> > >>> Input/output error (5) usually indicates some hardware problem, > not > > >> > >>> related to the application. > > >> > >>> > > >> > >>> As it's just a single file you're trying to copy, why not use > cp? > > >> > >>> Although I expect that cp will also throw an IO error at some > point. > > >> > >>> > > >> > >>> You could use --inplace --append --partial with rsync and > repeat the > > >> > >>> command until it finally completes. > > >> > >>> > > >> > >>> > > >> > >>> Paul > > >> > >>> > > >> > >>> -- > > >> > >>> Please use reply-all for most replies to avoid omitting the > mailing > > >> list. > > >> > >>> To unsubscribe or change options: > > >> > >>> https://lists.samba.org/mailman/listinfo/rsync > > >> > >>> Before posting, read: > > >> http://www.catb.org/~esr/faqs/smart-questions.html > > >> > >>> > > >> > >> > > >> > >> > > >> > >> -- > > >> > >> Mario. > > >> > >> > > >> > > > > >> > > > > >> > > -- > > >> > > Mario. > > >> > > > > >> > > > >> > > > >> > -- > > >> > Mario. > > >> > > >> > -- > > >> > Please use reply-all for most replies to avoid omitting the mailing > > >> list. > > >> > To unsubscribe or change options: > > >> https://lists.samba.org/mailman/listinfo/rsync > > >> > Before posting, read: > > >> http://www.catb.org/~esr/faqs/smart-questions.html > > >> > > >> > > > > > > -- > > > Mario. > > > > > > > > > -- > > Mario. > -- Mario.
-- Please use reply-all for most replies to avoid omitting the mailing list. To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
