I have attached a tail of the output of the tusc (368 lines.) The whole thing is 412MB gzip'ed down to 20, so if someone wants the whole thing, it's yours, but you have to let me know where to send it.
Command syntax at run time is:
server2 # /usr/local/bin/tusc -T "" -v -f /tmp/rsync -avvvvv file1.db /var/opt/ignite > /tmp/tusc.out 2>&1
From: "Don Malloy" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: HP-UX 11i and largefiles on rsync 2.6.2 Date: Mon, 19 Jul 2004 13:13:55 -0400
Every which way I try, it gets to 2146336768 bytes and stops. I have to cancel it with CRTL-C - it doesn't matter if it's over a remsh, ssh or local filesystem. There is nothing in the syslog regarding this. I have attached logs for all three (remsh,ssh, local fs - note local fs is much faster after the patch to generator.c)
I tried running an strace (mentioned in another post), however strace -f .... doesn't work in HPUX - the syntax is different.
Do you have any suggestions as to how to run the strace?, here is part of the man page:
strace(1M)
NAME strace - write STREAMS event trace messages to standard output
SYNOPSIS strace [ mod sub pri ] ...
DESCRIPTION
strace gets STREAMS event trace messages from STREAMS drivers and
modules via the STREAMS log driver (strlog(7)), and writes these
messages to standard output. By default, strace without arguments
writes all STREAMS trace messages from all drivers and modules.
strace with command-line arguments limits the trace messages received.
The arguments, which must be specified in groups of three, are:
mod Specifies the STREAMS module identification number from the streamtab entry.
sub Specifies a subidentification number (often corresponding to
a minor device).
pri Specifies a tracing priority level. strace gets messages of
a level equal to or less than the value specified by pri.
Only positive integer values are allowed.
The value all can be used for any argument in the strace command line to indicate that there are no restrictions for that argument.
Multiple sets of the three arguments can be specified to obtain the messages from more than one driver or module.
Only one strace process can open the STREAMS log driver at a time.
When strace is invoked, the log driver compares the sets of command line arguments with actual trace messages, returning only messages that satisfy the specified criteria.
STREAMS event trace messages have the following format:
seq time tick pri ind mod sub text
----------------------------
Here is the output of the rsync via remsh:
server2 # /tmp/rsync -avvvvv -e remsh --rsync-path=/tmp/rsync --progress --stats file1.db server1:/spare
cmd=remsh machine=server1 user= path=/spare
cmd=remsh server1 /tmp/rsync --server -vvvvvlogDtpr . /spare
opening connection using remsh server1 /tmp/rsync --server -vvvvvlogDtpr . /spare
(Client) Protocol versions: remote=28, negotiated=28
(Server) Protocol versions: remote=28, negotiated=28
building file list ...
[sender] make_file(file1.db,*,2)
[sender] expand file_list to 131072 bytes, did move
1 file to consider
[sender] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3
send_file_list done
file list sent
send_files starting
server_recv(2) starting pid=24806
recv_file_name(file1.db)
received 1 names
gid 3(sys) maps to 3
[receiver] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3
recv_file_list done
get_local_name count=1 /spare
recv_files(1) starting
generator starting pid=24806 count=1
delta transmission enabled
recv_generator(file1.db,0)
send_files(0, file1.db)
count=0 n=0 rem=0
send_files mapped file1.db of size 4304863232
calling match_sums file1.db
file1.db
2146336768 49% 3.04MB/s 0:11:32 (Press CTRL-C here)
_exit_cleanup(code=20, file=rsync.c, line=225): entered
rsync error: received SIGUSR1 or SIGINT (code 20) at rsync.c(225)
_exit_cleanup(code=20, file=rsync.c, line=225): about to call exit(20)
Here is the output of rsync via ssh:
server2 # /tmp/rsync -avvvvv -e ssh --rsync-path=/tmp/rsync --progress --stats file1.db server1:/spare
cmd=ssh machine=server1 user= path=/spare
cmd=ssh server1 /tmp/rsync --server -vvvvvlogDtpr . /spare
opening connection using ssh server1 /tmp/rsync --server -vvvvvlogDtpr . /spare
Password:
debug1: PAM: reinitializing credentials
debug1: permanently_set_uid: 0/3
Environment:
USER=root
LOGNAME=root
HOME=/root
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/opt/ssh/bin
MAIL=/var/mail/root
SHELL=/sbin/sh
TZ=EST5EDT
SSH_CLIENT=192.168.12.39 58685 22
SSH_CONNECTION=192.168.12.39 58685 192.168.15.232 22
(Client) Protocol versions: remote=28, negotiated=28
building file list ...
[sender] make_file(file1.db,*,2)
[sender] expand file_list to 131072 bytes, did move
1 file to consider
[sender] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3
send_file_list done
file list sent
send_files starting
server_recv(2) starting pid=24873
(Server) Protocol versions: remote=28, negotiated=28
recv_file_name(file1.db)
received 1 names
gid 3(sys) maps to 3
[receiver] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3
recv_file_list done
get_local_name count=1 /spare
recv_files(1) starting
generator starting pid=24873 count=1
delta transmission enabled
recv_generator(file1.db,0)
send_files(0, file1.db)
count=0 n=0 rem=0
send_files mapped file1.db of size 4304863232
calling match_sums file1.db
file1.db
2146861056 49% 1.26MB/s 0:27:49
Killed by signal 2. 1.26MB/s 0:27:49
_exit_cleanup(code=20, file=rsync.c, line=225): entered
rsync error: received SIGUSR1 or SIGINT (code 20) at rsync.c(225)
_exit_cleanup(code=20, file=rsync.c, line=225): about to call exit(20)
2146861056 49% 1.26MB/s 0:27:49
Here is the output for a local filesystem:
server2 # /tmp/rsync -avvvvv --progress --stats file1.db /var/opt/ignite/test
cmd= machine= user= path=/var/opt/ignite/test
cmd=. /var/opt/ignite/test
(Client) Protocol versions: remote=28, negotiated=28
(Server) Protocol versions: remote=28, negotiated=28
building file list ...
[sender] make_file(file1.db,*,2)
[sender] expand file_list to 131072 bytes, did move
1 file to consider
[sender] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3
send_file_list done
file list sent
send_files starting
server_recv(2) starting pid=17592
recv_file_name(file1.db)
received 1 names
gid 3(sys) maps to 3
[receiver] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3
recv_file_list done
get_local_name count=1 /var/opt/ignite/test
recv_files(1) starting
generator starting pid=17592 count=1
delta-transmission disabled for local transfer or --whole-file
recv_generator(file1.db,0)
send_files(0, file1.db)
count=0 n=0 rem=0
send_files mapped file1.db of size 4304863232
calling match_sums file1.db
file1.db
2142535680 49% 4.27MB/s 0:08:14
_exit_cleanup(code=20, file=rsync.c, line=225): entered
rsync error: received SIGUSR1 or SIGINT (code 20) at rsync.c(225)
_exit_cleanup(code=20, file=rsync.c, line=225): about to call exit(20)
rsync: writefd_unbuffered failed to write 60 bytes: phase "unknown": Broken pipe
_exit_cleanup(code=12, file=io.c, line=836): entered
rsync error: error in rsync protocol data stream (code 12) at io.c(836)
_exit_cleanup(code=12, file=io.c, line=836): about to call exit(12)
--------------------------------------------------------------------------------
HP-UX 11i and largefiles on rsync 2.6.2 Don Malloy nixuser23 at hotmail.com Thu Jul 15 20:30:50 GMT 2004
--------------------------------------------------------------------------------
Interestingly enough, now it stops dead when it hits 2146631680 bytes transferred.
I've attached the output as a file.
The rsync from /tmp is the patched one (I modified generator.c as noted and recompiled)
Any ideas?
Thanks again, Don
From: Wayne Davison <wayned at samba.org> To: Don Malloy <nixuser23 at hotmail.com> CC: rsync at lists.samba.org Subject: Re: HP-UX 11i and largefiles on rsync 2.6.2 Date: Thu, 15 Jul 2004 09:28:10 -0700
On Wed, Jul 14, 2004 at 04:46:41PM -0400, Don Malloy wrote: > The rsync transfers always fail at the 2GB mark.
There is a bug in the large-file support of 2.6.2 that is fixed by the attached patch. Either apply it using "patch" or manually edit the size_t to OFF_T manually, recompile, and give the resulting rsync a try.
..wayne.. << large-files.patch >>
_________________________________________________________________ STOP MORE SPAM with the MSN Premium and get 2 months FREE* http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines -------------- next part -------------- Patched version:
server2 # /tmp/rsync -avvvv -e remsh --rsync-path=/tmp/rsync --progress --stats file1.db server1:/spare opening connection using remsh server1 /tmp/rsync --server -vvvlogDtpr . /spare cmd=remsh machine=server1 user= path=/spare cmd=remsh server1 /tmp/rsync --server -vvvvlogDtpr . /spare opening connection using remsh server1 /tmp/rsync --server -vvvvlogDtpr . /spare (Client) Protocol versions: remote=28, negotiated=28 (Server) Protocol versions: remote=28, negotiated=28 building file list ... [sender] make_file(file1.db,*,2) [sender] expand file_list to 131072 bytes, did move 1 file to consider [sender] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3 send_file_list done file list sent send_files starting server_recv(2) starting pid=10383 recv_file_name(file1.db) received 1 names gid 3(sys) maps to 3 [receiver] i=0 <NULL> <NULL> file1.db mode=0100640 len=4304863232 uid=0 gid=3 recv_file_list done get_local_name count=1 /spare recv_files(1) starting generator starting pid=10383 count=1 delta transmission enabled recv_generator(file1.db,0) send_files(0, file1.db) count=0 n=0 rem=0 send_files mapped file1.db of size 4304863232 calling match_sums file1.db file1.db 2146631680 49% 3.07MB/s 0:11:26 <-- hangs at this point - CTRL-c _exit_cleanup(code=20, file=rsync.c, line=225): entered rsync error: received SIGUSR1 or SIGINT (code 20) at rsync.c(225) _exit_cleanup(code=20, file=rsync.c, line=225): about to call exit(20) server2 #
Unpatched version:
server2 # /usr/local/bin/rsync -avvv -e remsh
--rsync-path=/usr/local/bin/rsync --progress --stats file1.db server1:/spare
opening connection using remsh server1 /usr/local/bin/rsync --server
-vvvlogDtpr . /spare
building file list ...
[sender] make_file(file1.db,*,2)
[sender] expand file_list to 131072 bytes, did move
1 file to consider
send_file_list done
send_files starting
server_recv(2) starting pid=10278
recv_file_name(file1.db)
received 1 names
recv_file_list done
get_local_name count=1 /spare
recv_files(1) starting
generator starting pid=10278 count=1
delta transmission enabled
recv_generator(file1.db,0)
send_files(0, file1.db)
send_files mapped file1.db of size 4304863232
calling match_sums file1.db
file1.db
2127200256 49% 3.17MB/s 0:11:10
rsync: writefd_unbuffered failed to write 32768 bytes: phase "unknown":
Broken pipe
rsync error: error in rsync protocol data stream (code 12) at io.c(836)
_exit_cleanup(code=12, file=io.c, line=836): about to call exit(12)
_________________________________________________________________
MSN Premium helps eliminate e-mail viruses. Get 2 months FREE* http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
--
To unsubscribe or change options: http://lists.samba.org/mailman/listinfo/rsync
Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
_________________________________________________________________
Take charge with a pop-up guard built on patented Microsoft® SmartScreen Technology. http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines Start enjoying all the benefits of MSN® Premium right now and get the first two months FREE*. ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344126.395658 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344126.415635 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344126.415862 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344128.425705 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344135.165555 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344137.175583 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344186.394959 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344186.414918 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344186.415145 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344188.425010 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344195.164843 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344197.174883 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344246.394267 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344246.414219 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344246.414440 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344248.424307 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344255.164151 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344257.174250 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344306.395577 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344306.413524 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344306.413750 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344308.423604 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344315.163463 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344317.173495 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344366.394844 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344366.412828 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344366.413053 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344368.422911 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344375.162759 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344377.172810 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344426.392185 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344426.412131 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344426.412357 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344428.422227 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344435.162076 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344437.172116 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344486.391498 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344486.411439 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344486.411665 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344488.421528 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344495.161373 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344497.171420 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344546.390789 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344546.410748 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344546.410970 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344548.420830 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344555.160680 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344557.170727 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344606.390102 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344606.410051 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344606.410274 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344608.420143 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344615.159976 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344617.172059 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344666.389502 select(6, NULL, 0x7f7f8e9c, NULL, 0x7f7f90a4) ................................................................ = 0
nfds: 6
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344666.409359 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ = 0
nfds: 7
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344666.409592 write(6, "1c\0\0\td a t a r e c v 3 2 ".., 32) ........................................................... ERR#11 EAGAIN
1090344668.419564 select(7, NULL, 0x7f7f1d70, NULL, 0x7f7f1d68) ................................................................ [sleeping]
nfds: 7
readfds: NULL
writefds: 6
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344675.161341 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ = 0
nfds: 2
readfds: NULL
writefds: EMPTY
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
1090344677.169335 select(2, NULL, 0x7f7f215c, NULL, 0x7f7f2364) ................................................................ [sleeping]
nfds: 2
readfds: NULL
writefds: 1
errorfds: NULL
timeout.tv_sec: 60
timeout.tv_usec: 0
( Terminating process 14608 ("/tmp/rsync -avvvvv file1.db /var/opt/ignite") )
-- To unsubscribe or change options: http://lists.samba.org/mailman/listinfo/rsync Before posting, read: http://www.catb.org/~esr/faqs/smart-questions.html
