Jon, If you're still using MRTG to poll the values, the minimum you can do is still 5 minutes. The reason is that MRTG still created the RRAs, which are still 5 minute samples.
Use something like cacti or a roll your own poller and build an MRTG-like utility to stuffthe data into the RRD database. Paul >>> <[EMAIL PROTECTED]> 12/31/03 16:24 PM >>> I'm using using the following software to monitor link utilization on network devices: MRTG 2.9.17-3 RRDtool 1.0.45 14all.cgi I had started using MRTG alone, then converted to rrdtool and 14all.cgi. I also dropped my polling interval from 5 minutes to 1. When I look at the graphs, the values listed under them don't mesh with the data points on the curve. As one can see in the example: http://home1.gte.net/jodih/graph.png. The maximum out is stated to be 113.028Mbps, while the graph clearly shows it to be more about 150Mbps. Is there some sort of math error here? Thanks in advance, -Jon Hartman -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
