I don't think HP-UX 11.00 builds will run on 10.20 (or at least that has been my experience). I can't get the Perl stuff to compile under 10.20 either. I have not tried 11.00 yet (as I'm looking for an executable that will run on 10.20 and 11.00). I want to try out Cricket (which requires the Perl libs), but if you are not interested in the Perl stuff, the rrdtool executable should work. If I could just get the Perl to compile, I would be happy to tar up my /opt/rrdtool-1.0.28 directory and post it for everyone. By the way, I'm building with GCC 2.95.2, GNU make 3.79, and Perl 5.6.0 (from the HP porting center depot) on a B1000 workstation running HP-UX 10.20. I also have SoftBench 6.6 w/ aCC installed (but I'm not using it to build with).
Bjorn, are you compiling without GCC? I was not aware that rrdtool would compile using the default HP CC compiler (it is not ANSI, etc...). Maybe this is the trick... also, are you using the Perl depot from the HP porting center or did you compile Perl yourself? -Nathan Nathan Harris P-Com, Inc. ----- Original Message ----- From: "Bjorn Djupvik" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Wednesday, December 06, 2000 9:28 AM Subject: [rrd-users] Re: rrdtool installation on HP-UX 10.20 > > if you are interested I could send you a B11.00 binary that I was able to build, if you cant figure this stuff out! > I built it with CC and perl 5.6.0 on a 9000/777 B11.00 HP box.... > > > -bjorn > > > [EMAIL PROTECTED] wrote: > > > > Ok, my give up. Meesaa hope yousaa can help me. > > > > I am attempting to install the rrdtool on an HP-UX 10.20 box, and have not > > been able to get past the make stage. > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Help mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/rrd-users > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/rrd-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
