I suspect you might be recording in multiple-take mode, which is for
a different purpose. The usual procedure for multitrack recording is as
follows:
Arm (yellow light) track 1. Make sure no other tracks are armed.
Record. A recording segment should appear on track 1. Stop when done.
Un-arm track 1 and arm track 2. Record. A recording segment should
appear on track 2. Stop when done.
Now play and you should hear both. There are problems that can crop
up, though, so if it still isn't working, we'll need to look a little
more closely at your setup.
To "arm" or "un-arm" a track, click on the yellow light to the left
of the track. When lit, the track is armed. You can hover over the
lights to get a tooltip explaining what each one is for. (I can never
keep solo and mute straight, so I use the tooltips all the time.)
Ted.
On 5/18/23 9:58 PM, Jozseph Hogan wrote:
I am starting to play a little bit with rosegarden an recording tracks.
I've figured out how to record tracks.
I recorded a track, and then to record the second one, I press record,
and I can get the first track to play while recording the second.
Well, when I want to listen to the recorded tracks together, I can not
get this to work:(
I can only hear one of the other.
How can I get both tracks to play at once?
Thanks
Joseph
_______________________________________________
Rosegarden-user mailing list
[email protected] - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-user
_______________________________________________
Rosegarden-user mailing list
[email protected] - use the link below to unsubscribe
https://lists.sourceforge.net/lists/listinfo/rosegarden-user
