On Thu, 10 Sep 2015 10:19:52 +0200 Lorenzo Sutton <[email protected]> wrote:
> > > On 10/09/2015 06:02, Tom Lechner wrote: > > Thanks for the response! > > > > 1... > > Say you have 2 (vertical) tracks. Each has one segment. Both tracks use > > the same instrument and play back to the same midi channel. In the first > > track, the segment starts at time 0. In the second track, the segment > > starts at, say, 5 seconds. Now when I play from time 0, at about 5 > > seconds the pedal cuts out. I'll to go back and check if notes also cut > > out.. I only definitely noticed the pedal going out.. It's possible > > merging controller events from different tracks just doesn't play nice? > > Yes it's possible if the different tracks have the same midi channel. So > what might be happening is that you have a CC 64 on on track 1 but then > on track 2 you have a CC 64 off that's what's "cutting" your sustain > pedal.. have a look with the score view, pedal controllers should be > visible as traditional "Ped" and "*".. > > [...] Not certain about this, but I think RG sends a 'reset all controllers' per track. I've a suspicion it does this when it sees the first segment of the track. If I'm right putting a dummy segment at the start of the track should fix it. -- W J G ------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ Rosegarden-user mailing list [email protected] - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
