Also, when using default setting Riak will write three copies of your data to your cluster - even if you only have a cluster of one machine.
-Alexander @siculars http://siculars.posthaven.com Sent from my iRotaryPhone > On Mar 27, 2017, at 11:25, Luke Bakken <lbak...@basho.com> wrote: > > Hi Tsutomu, > > You should only use objects up to a maximum of 1MiB in size with Riak > KV. If you wish to store larger objects or files, please use Riak CS. > > -- > Luke Bakken > Engineer > lbak...@basho.com > >> On Sun, Mar 26, 2017 at 5:38 PM, <wakuda_tsut...@intec.co.jp> wrote: >> Hello. >> >> The following problem occurred, Please give me on solution. >> >> (Problem) >> I registered a 10mb to 1000mb file. >> Then RiakKV hung up when the batch program was accessing files from 100 MB >> to 600 MB. >> RiakKV hung up due to insufficient memory. >> >> (Question) >> 1.The problem that occurred this time is the effect of data accessed to a >> 20-1000 MB file? >> Or is it another problem? >> >> 2.During RiakKV data update, when you want to access RiakKV data, >> do you need to do something special? >> Do you need a lot of memory? >> >> (Objects) >> file: 3,882,892 >> file size(total): 332.46GB(346,243,500,913byte) >> file objects: >> 1- 10MB = 3,800,000(all) >> 20- 50MB = 40 to 100 >> 100-1000MB = 50 >> >> (Riak Sever) >> OS:Red Hat Enterprise Linux Server release 6.7 (Santiago) >> （Linux patdevsrv02 2.6.32-573.el6.x86_64） >> CPU:Intel(R) Xeon(R) CPU E5640 @2.67GHz * 2 >> Memory:12GB >> Swap:14GB >> Network:1Gbps >> Disk: >> Filesystem Size Used Avail Use% Mounted on >> /dev/sda3 261G 67G 182G 27% / >> tmpfs 5.9G 300K 5.9G 1% /dev/shm >> /dev/sda1 477M 71M 381M 16% /boot >> /dev/sdb1 275G 243G 19G 93% /USR1 >> /dev/sdc1 1.7T 1.5T 76G 96% /USR2 >> /dev/sdd1 1.1T 736G 309G 71% /USR3 <<< Store >> /dev/sde1 1.1T 1.1T 18G 99% /USR4 >> /dev/sdf1 1.4T 1.1T 365G 74% /media/USB-HDD1 >> >> (Riak) >> RiakKV 2.2.0 (riak-2.2.0-1.el6.x86_64.rpm) >> >> (Riak Node) >> 1 Node. >> >> !!!We plan to add two nodes to the cluster at a later date.!!! >> >> (Java) >> Java1.8 (jre-8u121-linux-x64.rpm) >> >> (riak setting) >> /etc/riak/riak.conf >> storage_backend = leveldb >> leveldb.maximum_memory.percent = 50 >> object.size.maximum = 2GB >> listener.http.internal = 0.0.0.0:8098 >> listener.http.internal = 0.0.0.0:8098 >> platform_data_dir = /USR3/riak >> nodename = riak@... >> riak_control = on >> >> !!!Settings other than these remain the default.!!! >> >> (linux setting) >> /etc/security/limits.conf >> * soft nofile 65536 >> * hard nofile 65536 >> >> Thank you. >> >> Tsutomu Wakuda >> >> >> _______________________________________________ >> riak-users mailing list >> riak-users@lists.basho.com >> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com > > _______________________________________________ > riak-users mailing list > riak-users@lists.basho.com > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com _______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
