1. Check the erlang vm variable "nettick", I believe. 2. Hinted handoff resource allocation are configurable via config file or at runtime.
On Wed, Feb 22, 2017 at 12:07 Andrey Ershov <andrers...@gmail.com> wrote: > Hi, guys! > > I'm testing netsplit in Riak and can not achieve satisfiable behaviour. > I've just two nodes cluster and bucket with the following settings n=3, > w=2, r=2. And I have just a couple of entries. > Basically I have two problems: > 1) After the split, writes on one side of the partition start lagging > hard. It takes more than 1 minute for the first write to be become > successful. I understand that this is related to the process of setting up > backup vnodes in Riak, but is any way to speed up the process? Which > configuration parameters influence that? > 2) More weird problem is after netsplit. "riak-admin transfers" command > immediately reports that there should 5 partition transfers from one node > to another and 5 partition transfers in the opposite direction. But active > transfers output is empty! > I've put a watch on this command and active transfers are always empty. > Finally, it takes several minutes for Riak to finish hinted handoff. > Several minutes just for several keys! > What Riak is doing all this time? Anyway to speed up the process? > 3) The reason why I'm concerned about hinted-handoff speed is because, I > noticed that until this process finishes, I read stale data on both sides > of ex-netsplit. > > > -- > Thanks, > Andrey > _______________________________________________ > riak-users mailing list > riak-users@lists.basho.com > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com > -- Alexander Sicular Solutions Architect Basho Technologies 9175130679 @siculars
_______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
