Hello there,
The problem was caused by a wrong erlang installation. Most probable cause is the SSL part on OSX. Fetched the dmg file from erlang solutions’ webpage and installed it. Riak then compiled perfectly from source. Zsolt Feladó: Zsolt Laky [mailto:zsolt.l...@lamardan.com] Küldve: Saturday, June 28, 2014 1:13 PM Címzett: 'Riak Users Mailing List' Tárgy: Timeout when accessing a key in a strongly consistent bucket. Please help. Hello there, Installed new 2.0beta, fired up 1 node. Config and status is attached. Strongly consistent bucket type seems to have timeouts. Host is Mac OSX. Also tried on ubuntu with virtualbox. Same behavior. Commands are bold, important replies are underlined for readability. Please help. Thanks and kind regards Zsolt bash-3.2$ ./riak-admin member-status ================================= Membership ================================== Status Ring Pending Node ------------------------------------------------------------------------------- valid 100.0% -- 'riak@127.0.0.1' ------------------------------------------------------------------------------- Valid:1 / Leaving:0 / Exiting:0 / Joining:0 / Down:0 bash-3.2$ ./riak-admin bucket-type list default (active) strong (active) bash-3.2$ ./riak-admin bucket-type status strong strong is active young_vclock: 20 w: quorum small_vclock: 50 rw: quorum r: quorum pw: 0 precommit: [] pr: 0 postcommit: [] old_vclock: 86400 notfound_ok: true n_val: 3 linkfun: {modfun,riak_kv_wm_link_walker,mapreduce_linkfun} last_write_wins: false dw: quorum dvv_enabled: true chash_keyfun: {riak_core_util,chash_std_keyfun} big_vclock: 50 basic_quorum: false allow_mult: true consistent: true active: true claimant: 'riak@127.0.0.1' bash-3.2$ curl -v -XPOST -H 'Content-Type: text/plain' -d 'haho' http://127.0.0.1:8098/types/default/buckets/test1/keys/user1?returnbody=true * About to connect() to 127.0.0.1 port 8098 (#0) * Trying 127.0.0.1... * Adding handle: conn: 0x7f95d3004400 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7f95d3004400) send_pipe: 1, recv_pipe: 0 * Connected to 127.0.0.1 (127.0.0.1) port 8098 (#0) > POST /types/default/buckets/test1/keys/user1?returnbody=true HTTP/1.1 > User-Agent: curl/7.30.0 > Host: 127.0.0.1:8098 > Accept: */* > Content-Type: text/plain > Content-Length: 4 > * upload completely sent off: 4 out of 4 bytes < HTTP/1.1 200 OK < X-Riak-Vclock: a85hYGBgzGDKBVIcypz/fgavmz0/gymRKY+VYaak8lm+LAA= < Vary: Accept-Encoding * Server MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) is not blacklisted < Server: MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) < Link: </buckets/test1>; rel="up" < Last-Modified: Sat, 28 Jun 2014 10:48:57 GMT < ETag: "4Cd4ejclOJPXjES2m3nxPi" < Date: Sat, 28 Jun 2014 10:48:57 GMT < Content-Type: text/plain < Content-Length: 4 < * Connection #0 to host 127.0.0.1 left intact hahobash-3.2$ bash-3.2$ curl -v -XPOST -H 'Content-Type: text/plain' -d 'haho' http://127.0.0.1:8098/types/strong/buckets/test1/keys/user1 * About to connect() to 127.0.0.1 port 8098 (#0) * Trying 127.0.0.1... * Adding handle: conn: 0x7fbee3804400 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7fbee3804400) send_pipe: 1, recv_pipe: 0 * Connected to 127.0.0.1 (127.0.0.1) port 8098 (#0) > POST /types/strong/buckets/test1/keys/user1 HTTP/1.1 > User-Agent: curl/7.30.0 > Host: 127.0.0.1:8098 > Accept: */* > Content-Type: text/plain > Content-Length: 4 > * upload completely sent off: 4 out of 4 bytes < HTTP/1.1 503 Service Unavailable < Vary: Accept-Encoding * Server MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) is not blacklisted < Server: MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) < Date: Sat, 28 Jun 2014 10:49:25 GMT < Content-Type: text/plain < Content-Length: 18 < request timed out * Connection #0 to host 127.0.0.1 left intact bash-3.2$ curl -v http://127.0.0.1:8098/types/default/buckets/test1/keys/?keys=true * About to connect() to 127.0.0.1 port 8098 (#0) * Trying 127.0.0.1... * Adding handle: conn: 0x7f8df1801800 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7f8df1801800) send_pipe: 1, recv_pipe: 0 * Connected to 127.0.0.1 (127.0.0.1) port 8098 (#0) > GET /types/default/buckets/test1/keys/?keys=true HTTP/1.1 > User-Agent: curl/7.30.0 > Host: 127.0.0.1:8098 > Accept: */* > < HTTP/1.1 200 OK < Vary: Accept-Encoding * Server MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) is not blacklisted < Server: MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) < Date: Sat, 28 Jun 2014 11:03:44 GMT < Content-Type: application/json < Content-Length: 18 < * Connection #0 to host 127.0.0.1 left intact {"keys":["user1"]}bash-3.2$ curl -v http://127.0.0.1:8098/types/strong/buckets/test1/keys/?keys=true * About to connect() to 127.0.0.1 port 8098 (#0) * Trying 127.0.0.1... * Adding handle: conn: 0x7fa1b0819400 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1 * - Conn 0 (0x7fa1b0819400) send_pipe: 1, recv_pipe: 0 * Connected to 127.0.0.1 (127.0.0.1) port 8098 (#0) > GET /types/strong/buckets/test1/keys/?keys=true HTTP/1.1 > User-Agent: curl/7.30.0 > Host: 127.0.0.1:8098 > Accept: */* > < HTTP/1.1 200 OK < Vary: Accept-Encoding * Server MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) is not blacklisted < Server: MochiWeb/1.1 WebMachine/1.10.5 (jokes are better explained) < Date: Sat, 28 Jun 2014 11:03:58 GMT < Content-Type: application/json < Content-Length: 11 < * Connection #0 to host 127.0.0.1 left intact {"keys":[]}bash-3.2$ bash-3.2$ --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com
_______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
