> -----Original Message----- > From: Hector Castro [mailto:hec...@basho.com] > Sent: Monday, April 15, 2013 11:40 PM > To: HARLOW Peter > Cc: Jared Morrow; riak-users@lists.basho.com > Subject: Re: Riak 1.3.1 install from source on closed network > > Hi Peter, > > Despite the fact that the instructions assume you're working with Riak > 1.3.0, please follow the "Installation on Closed Networks" section on > the installing Riak from source page [0]. The steps there, combined > with Jared's instructions to alter line 79 of Makefile [1] so that it > reads: > > dev% : riaknostic > > instead of: > > dev% : all riaknostic > > should allow you to successfully complete an installation without a > network connection (after downloading the 1.3.0 zipball for LevelDB). > > Please let us know if you encounter further issues.
Hello Hector, That nearly worked, except that there was no riaknostic/deps directory to receive the copies of lager/getopt/meck. So, adding that directory, the procedure I get is: tar -zxvf riak-1.3.1.tar.gz mv basho-leveldb-1.3.0-0-gdbb3e19.zip riak-1.3.1/deps/eleveldb/c_src/leveldb.zip cd riak-1.3.1/deps/eleveldb/c_src/ unzip leveldb.zip mv basho-leveldb-* leveldb cd ../../ mkdir riaknostic/deps cp -R lager riaknostic/deps cp -R getopt riaknostic/deps cp -R meck riaknostic/deps cd ../ # edit line 79 of makefile 'all riaknostic' -> 'riaknostic' make rel make devrel which compiles! Thanks for your help, Peter Harlow Systems Engineer Thales Communications & Security S.A T&S-Billetique/Projets & Systemes/I&A Rue de la Mare aux Joncs 91229 Bretigny sur Orge Cedex Tel: +33 (0) 1 69 88 59 41 Fax: +33 (0)1 69 88 57 35 Email : peter.har...@thalesgroup.com > On Mon, Apr 15, 2013 at 9:28 AM, HARLOW Peter > <peter.har...@thalesgroup.com> wrote: > > From: Jared Morrow [mailto:ja...@basho.com] > > Sent: Monday, April 15, 2013 2:10 PM > > > > > > To: HARLOW Peter > > Cc: riak-users@lists.basho.com > > Subject: Re: Riak 1.3.1 install from source on closed network > > > > > > > > Peter, > > > > I see where you hit your problem. In the 'make devrel' step it did > try to go > > out to the network to re-clone all of the dependencies. To fix this, > simply > > change this line in the Makefile: > > https://github.com/basho/riak/blob/riak-1.3.1/Makefile#L79 from > > > > dev% : all riaknostic > > > > to > > > > dev% : riaknostic > > > > Remove the 'dev' directory to make sure everything is clean and try > to run > > 'make devrel' again. > > > > Let me know how that goes. > > > > A devrel directory didn't seem to get generated - but I unpacked a > new > > source tree to be sure. > > > > > > > > Unfortunately there was no change. > > > > > > > > Make all completed, but make devrel produced the same errors as > before. > > > > > > > > Regards, > > > > > > > > > > > > Peter Harlow > > > > Systems Engineer > > > > Thales Communications & Security S.A > > > > T&S-Billetique/Projets & Systemes/I&A > > > > Rue de la Mare aux Joncs > > > > 91229 Bretigny sur Orge Cedex > > > > Tel: +33 (0) 1 69 88 59 41 > > > > Fax: +33 (0)1 69 88 57 35 > > > > Email : peter.har...@thalesgroup.com > > > > > > > > From: Jared Morrow [mailto:ja...@basho.com] > > Sent: Monday, April 15, 2013 2:10 PM > > > > > > To: HARLOW Peter > > Cc: riak-users@lists.basho.com > > Subject: Re: Riak 1.3.1 install from source on closed network > > > > > > > > Peter, > > > > I see where you hit your problem. In the 'make devrel' step it did > try to go > > out to the network to re-clone all of the dependencies. To fix this, > simply > > change this line in the Makefile: > > https://github.com/basho/riak/blob/riak-1.3.1/Makefile#L79 from > > > > dev% : all riaknostic > > > > to > > > > dev% : riaknostic > > > > Remove the 'dev' directory to make sure everything is clean and try > to run > > 'make devrel' again. > > > > Let me know how that goes. > > > > Sorry for the troubles, > > Jared > > > > > > > > > > > > On Mon, Apr 15, 2013 at 3:25 AM, HARLOW Peter > <peter.har...@thalesgroup.com> > > wrote: > > > > From: Jared Morrow [mailto:ja...@basho.com] > > Sent: Friday, April 12, 2013 3:23 PM > > To: HARLOW Peter > > Cc: riak-users@lists.basho.com > > Subject: Re: Riak 1.3.1 install from source on closed network > > > > > > > >>Peter, > > > > > > > >>For 1.3.0 & 1.3.1 of Riak, you use the "1.3.0" version of leveldb. > > > > > > > > Thanks, Jared. > > > > > > > > Unfortunately I am not getting very far with this. I can't find the > > instructions I used with version 1.2.1, but copying the procedure > from that > > machine: > > > > > > > > tar -zxvf riak-1.3.1.tar.gz > > > > mv basho-leveldb-1.3.0-0-gdbb3e19.zip > > riak-1.3.1/deps/eleveldb/c_src/leveldb.zip > > > > cd riak-1.3.1/deps/eleveldb/c_src/ > > > > unzip leveldb.zip > > > > mv basho-leveldb-* leveldb > > > > cd ../../../ > > > > make all > > > > make devrel > > > > > > > > …make all seems to run but make devrel finishes with the errors: > > > > > > > > make[1]: Entering directory `/home/riak/riak/riak- > 1.3.1/deps/riaknostic' > > > > ./rebar get-deps > > > > ==> riaknostic (get-deps) > > > > Pulling lager from {git,"git://github.com/basho/lager",{tag,"1.2.2"}} > > > > fatal: Unable to look up github.com (port 9418) (Temporary failure in > name > > resolution) > > > > Initialized empty Git repository in > > /home/riak/riak/riak-1.3.1/deps/riaknostic/deps/lager/.git/ > > > > ERROR: git clone -n git://github.com/basho/lager lager failed with > error: > > 128 and output: > > > > fatal: Unable to look up github.com (port 9418) (Temporary failure in > name > > resolution) > > > > Initialized empty Git repository in > > /home/riak/riak/riak-1.3.1/deps/riaknostic/deps/lager/.git/ > > > > > > > > make[1]: *** [deps] Error 1 > > > > make[1]: Leaving directory `/home/riak/riak/riak- > 1.3.1/deps/riaknostic' > > > > make: *** [riaknostic] Error 2 > > > > > > > > > > > > OS: CentOS 6.4 64-bit > > > > Erlang: R15B01 > > > > > > > > Regards, > > > > > > > > Peter Harlow > > > > Systems Engineer > > > > Thales Communications & Security S.A > > > > T&S-Billetique/Projets & Systemes/I&A > > > > Rue de la Mare aux Joncs > > > > 91229 Bretigny sur Orge Cedex > > > > Tel: +33 (0) 1 69 88 59 41 > > > > Fax: +33 (0)1 69 88 57 35 > > > > Email : peter.har...@thalesgroup.com > > > > > > > > > > _______________________________________________ > > riak-users mailing list > > riak-users@lists.basho.com > > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com > > _______________________________________________ riak-users mailing list riak-users@lists.basho.com http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
