On Tue, 2010-05-18 at 12:19 +0200, John Frankish wrote: > > -----Original Message----- > > From: Bastien Nocera [mailto:had...@hadess.net] > > Sent: Tuesday, 18 May, 2010 13:12 > > To: John Frankish > > Cc: rhythmbox-devel@gnome.org > > Subject: Re: [Rhythmbox-devel] Bluetooth, AVRCP and Rhythmbox > > > > On Tue, 2010-05-18 at 06:35 +0200, John Frankish wrote: > > <snip> > > > > Thanks for the feedback. > > > > > > > > Yes, the uinput module is loaded and I've tried with alsa alone and > > > > with alsa+pulseaudio > > > > > > > > At the first remote AVRCP key press, I see this in dmesg: > > > > > > > > input: 00:1B:66:00:31:88 as /devices/virtual/input/input11 > > > > > > > > ..and if I run bluetoothd in the foreground, I see (for example): > > > > > > > > bluetoothd[4253]: AVRCP: uinput initialized for 00:1B:66:00:31:88 > > > > bluetoothd[4253]: AVCTP Connected > > > > ... > > > > bluetoothd[4253]: AVRCP: BACKWARD pressed > > > > bluetoothd[4253]: Got 8 bytes of data for AVCTP session 0xb79d86e0 > > > > bluetoothd[4253]: AVCTP transaction 8, packet type 0, C/R 0, IPID0, > > > > PID 0x110E > > > > bluetoothd[4253]: AVRCP command 0x0, subunit_type 0x09, subunit_id 0x0, > > > > opcode 0x7C, 2 operands > > > > bluetoothd[4253]: AVRCP: BACKWARD released > > > > <snip> > > > > ... > > > > > > > > But there is no corresponding action in rhythmbox > > > > > > > > John > > > ---------------- > > > I understand the communications chain should be: > > > > > > AVRCP signal -> bluetoothd -> uinput -> X -> gnome-settings-daemon -> > > rhythmbox > > > > Could you test "evtest" on the device created? There should be a device > > created in /dev/input/* for the fake input, check whether events are > > sent there. > I don't see a new /dev/input/* being created, but there is: > > /sys/devices/virtual/input/input11/event11 > > $ cat /proc/bus/input/devices > ... > I: Bus=0005 Vendor=0000 Product=0000 Version=0000 > N: Name="00:1B:66:00:31:88" > P: Phys= > S: Sysfs=/devices/virtual/input/input11 > U: Uniq= > H: Handlers=kbd event11 > B: EV=100007 > B: KEY=10300 168 0 0 0 0 0 > B: REL=0
Looks like it could be the one. > > > Is gnome-settings-daemon the only way to do this or is there another > > way? > > > > It's not the only way to do it, but it's the supported way for GNOME > > applications, and Rhythmbox in particular. > > > > > The AVRCP signal is getting as far as uinput, but using "dbus-monitor > > > --session", I cannot see any dbus > > > AVRCP events in X and gnome-settings-daemon seems to have a problem > > > (debug output below) > > > > > > How does the AVRCP signal get from uinput to X? > > > > > > John > > > ---------------- > > > DEBUG: Property: 'bluez.name' = 'Sennheiser PXC310BT' > > > DEBUG: Property: 'device.icon_name' = 'audio-headphones-bluetooth' > > > DEBUG: Starting keyboard manager > > > [1274118894,000,xklavier.c:xkl_engine_start_listen/] The backend does > > > not require manual layout > > > management - but it is provided by the application > > > DEBUG: Starting a11y_keyboard manager > > > DEBUG: Starting media_keys manager > > > DEBUG: Unable to parse: 'XF86AudioMute' > > > DEBUG: Unable to parse: 'XF86AudioLowerVolume' > > > DEBUG: Unable to parse: 'XF86AudioRaiseVolume' > > > <snip> > > > > Huh. Did you compile gnome-settings-daemon yourself? That does look > > like > > a problem indeed... > > > > Cheers > > Yes, I compiled it myself, but the dependencies appeared to have all > been met and there were no error messages. What would be needed to > enable 'XF86AudioMute', etc to be parsed? You're missing /usr/include/X11/XF86keysym.h from somewhere. So the problem has nothing to do with Rhythmbox, just your setup. Cheers _______________________________________________ rhythmbox-devel mailing list rhythmbox-devel@gnome.org http://mail.gnome.org/mailman/listinfo/rhythmbox-devel
