I have 2 windows boxes and want them to connect to my linuz box which is connected to internet through a adsl modem. The Linuz box has 2 nics , one for the internet connection (eth0) and 1 (eth1)to the hub where the windows boxes are connected. I have installed bridge-utils-0.9.5-1 and enabled IP-forwarding and networking and append the cards in lilo.conf.Also set the DEVICE=eth0 in ifcfg-eth0 file and DEVICE=eth1 in ifcfg-eth1 file. I have enabled bridge when I compiled the kernel so I can modprobe bridge and have checked it with lsmod. I have set the 2 cards in promisc mode and have checked that they are in that mode. When I add the bridge bro and add the card eth1 and then bring the bride up with ifconfig br0 up, Internet work on the Linuz maschine. But when I add the card eth0 and bring the bridge up, I can't access internet no longer. the showstp command in brctl show that both cards are in forwarding mode.The ports used is 8001 for eth0 and port 8002 for eth1. I have also tride to modify the /etc/service file to put aliases on port 80 (http port) to point to port 8001 and 8002. But it resulted in that I couldent connect to internet despite when the bride where removed. I dont think my cards which both are RealTech 8139 is the best cards for this purpose, but thats what I have. Any idea of what is wrong and what I have missed?
===== Investigating the Norwegain 4.th Secret Service The multiheaded beast. http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm ______________________________________________________ Se den nye Yahoo! Mail på http://no.yahoo.com/ Nytt design, enklere å bruke, alltid tilgang til Adressebok, Kalender og Notisbok -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
