You will need at least part of the X installation since ssh runs xauth to spoof the X DISPLAY. I have just done this to connect onto an OpenBSD gateway which didn't have X libraries, I wanted to ssh again from there to another box (FreeBSD) and run the X application on that with the display on my laptop. It failed because the gateway box could not run xauth. Once I installed the xbase libraries it worked.
Paul On Tue, Jul 16, 2002 at 08:37:18AM -0400, Chris Mason wrote: > I have a Redhat 7.3 laptop running KDE3 and a Redhat 7.3 server with no > X installed. > I want to connect over ssh and run an application on my local desktop. > It won't work, in short. > Here's the output. I am tearing my hair out witrh this one, any help > appreciated. > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > [masonc@dell masonc]$ ssh -v -v -X -f loki ARKEIA > > OpenSSH_3.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090602f > debug1: Reading configuration data /etc/ssh/ssh_config > debug1: Applying options for * > debug1: Rhosts Authentication disabled, originating port will not be > trusted. > debug1: restore_uid > debug1: ssh_connect: getuid 500 geteuid 0 anon 1 > debug1: Connecting to loki [10.10.46.1] port 22. > debug1: temporarily_use_uid: 500/500 (e=0) > debug1: restore_uid > debug1: temporarily_use_uid: 500/500 (e=0) > debug1: restore_uid > debug1: Connection established. > debug1: read PEM private key done: type DSA > debug1: read PEM private key done: type RSA > debug1: identity file /home/masonc/.ssh/identity type -1 > debug2: key_type_from_name: unknown key type '-----BEGIN' > debug2: key_type_from_name: unknown key type '-----END' > debug1: identity file /home/masonc/.ssh/id_rsa type 1 > debug1: identity file /home/masonc/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version > OpenSSH_3.1p1 > debug1: match: OpenSSH_3.1p1 pat OpenSSH* > Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.1p1 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug2: kex_parse_kexinit: > diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 > debug2: kex_parse_kexinit: ssh-rsa,ssh-dss > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: none > debug2: kex_parse_kexinit: none > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: first_kex_follows 0 > debug2: kex_parse_kexinit: reserved 0 > debug2: kex_parse_kexinit: > diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1 > debug2: kex_parse_kexinit: ssh-rsa,ssh-dss > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-c > bc > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: > hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-9 > 6,hmac-md5-96 > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: first_kex_follows 0 > debug2: kex_parse_kexinit: reserved 0 > debug2: mac_init: found hmac-md5 > debug1: kex: server->client aes128-cbc hmac-md5 none > debug2: mac_init: found hmac-md5 > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: dh_gen_key: priv key bits set: 127/256 > debug1: bits set: 1596/3191 > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'loki' is known and matches the RSA host key. > debug1: Found key in /home/masonc/.ssh/known_hosts:6 > debug1: bits set: 1609/3191 > debug1: ssh_rsa_verify: signature correct > debug1: kex_derive_keys > debug1: newkeys: mode 1 > debug1: SSH2_MSG_NEWKEYS sent > debug1: waiting for SSH2_MSG_NEWKEYS > debug1: newkeys: mode 0 > debug1: SSH2_MSG_NEWKEYS received > debug1: done: ssh_kex2. > debug1: send SSH2_MSG_SERVICE_REQUEST > debug1: service_accept: ssh-userauth > debug1: got SSH2_MSG_SERVICE_ACCEPT > debug1: authentications that can continue: > publickey,password,keyboard-interactive > debug1: next auth method to try is publickey > debug1: try privkey: /home/masonc/.ssh/identity > debug1: try pubkey: /home/masonc/.ssh/id_rsa > debug2: we sent a publickey packet, wait for reply > debug1: input_userauth_pk_ok: pkalg ssh-rsa blen 149 lastkey 0x8086d50 > hint 1 > debug2: input_userauth_pk_ok: fp > 18:5f:5e:06:f7:21:c2:80:9d:29:aa:15:9e:82:80:88 > debug1: read PEM private key done: type RSA > debug1: ssh-userauth2 successful: method publickey > debug1: fd 4 setting O_NONBLOCK > debug1: fd 5 setting O_NONBLOCK > debug1: channel 0: new [client-session] > debug1: send channel open 0 > [masonc@dell masonc]$ debug1: Entering interactive session. > debug2: callback start > debug1: ssh_session2_setup: id 0 > debug2: x11_get_proto /usr/X11R6/bin/xauth list :0.0 2>/dev/null > debug1: Requesting X11 forwarding with authentication spoofing. > debug1: channel request 0: x11-req > debug1: Sending command: ARKEIA > debug1: channel request 0: exec > debug1: fd 3 setting TCP_NODELAY > debug2: callback done > debug1: channel 0: open confirm rwindow 0 rmax 32768 > debug1: Remote: No xauth program; cannot forward with spoofing. > debug2: channel 0: rcvd adjust 131072 > debug2: channel 0: rcvd ext data 31 > debug2: channel 0: rcvd ext data 31 > debug1: channel 0: rcvd eof > debug1: channel 0: output open -> drain > debug1: channel 0: obuf empty > debug1: channel 0: close_write > debug1: channel 0: output drain -> closed > debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 > debug1: channel 0: rcvd close > debug1: channel 0: close_read > debug1: channel 0: input open -> closed > debug2: channel 0: active efd: 6 len 62 type write > Cannot connect to X server [] > > Cannot connect to X server [] > > debug2: channel 0: written 62 to efd 6 > debug1: channel 0: almost dead > debug1: channel 0: gc: notify user > debug1: channel 0: gc: user detached > debug1: channel 0: send close > debug1: channel 0: is dead > debug1: channel 0: garbage collecting > debug1: channel_free: channel 0: client-session, nchannels 1 > debug1: fd 1 clearing O_NONBLOCK > debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.5 seconds > debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0 > debug1: Exit status 255 > > > > Chris Mason > [EMAIL PROTECTED] > Box 340, The Valley, Anguilla, British West Indies > Tel: 264 497 5670 Fax: 264 497 8463 Cell: 264 235 5670 > http://www.anguillaguide.com/ The Anguilla Guide > Talk to me in real time: > Yahoo:netconcepts_anguilla > US Fax and Voicemail: (815)301-9759 > > > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
