I typically use:
ncpmount -S server mnt -U username
It prompts me for the password and after I type it in I have access to
the server.
I tried your command:
ncpmount -S server -V sys mnt -C -U username -P password
which also works for me.
I took a look at the FAQ for ncpfs. It mentions using the -b option
with ncpmount if you can't login. The man page says to use -b if you're
connecting to Netware 4 or 5 through bindery emulation instead of NDS.
You could try that and see if it works.
What Netware version are you using?
On Wed, 2002-02-20 at 11:23, James Pifer wrote:
> I used the commands and I get the same results. I can do an slist and
> see the server, but get and invalid nd login when I try to use
> ncpmount.Can you send me an example of your ncpmount command?
>
> I even tried a user on netware that has no password and used the -n
> option. It still says 'Invalid password (-669) nds login'
>
> Thanks,
> James
>
>
> On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote:
> > I interface Redhat 7.1 to a 4.11 Netware server. I tried the command
> > you list and it worked just fine for me. I don't really see a problem
> > with your ncpmount command. The only other thing I can think of is that
> > I configured the ipx interface differently. I didn't have to do
> > ipx_configure --auto_interface=on --auto_primary=on
> > In fact when I've tried that before I've had trouble getting it
> > working. In my /etc/rc.d/rc.local script file I insert the following
> > lines:
> > /sbin/ipx_interface delall
> > /sbin/ipx_interface add -p eth0 802.2
> > We happen to be using 802.2. You can substitute ETHERNETII or whatever
> > your fame type happens to be. After I do that everything works. I am
> > puzzled that you can see the server with slist. It seems like if you
> > were having a fundamental problem where the interface wasn't setup
> > correctly then you wouldn't be able to see the server at all.
> >
> > On Tue, 2002-02-19 at 12:55, James Pifer wrote:
> > > I'm trying to use ncpmount to connect to a Netware server. I've followed
> > > the howto and have done this:
> > >
> > > #ipx_configure --auto_interface=on --auto_primary=on
> > >
> > > I can then do:
> > > #slist servername
> > >
> > > and it returns the servername with the correct IPX address, etc.
> > >
> > > When I try to issue the ncpmount command I can't login. I'm trying:
> > > #ncpmount -S servername -V volume /share/sys -C -U username -P password
> > >
> > > I keep getting ncpmount: Invalid password (-669) in nds login
> > > Login denied.
> > >
> > > -I have the server in /etc/hosts in case it matters
> > > -I've tried two different logins and I know the passwords are correct.
> > > -I've tried with and without -C, which I don't think would make a
> > > difference here anyway
> > > -I've tried just the username, as well as distinguished, such as
> > > username.context
> > > -I've tried without -P so it prompts for username.
> > >
> > > Can anyone help out?
> > >
> > > Thanks,
> > > James
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Redhat-list mailing list
> > > [EMAIL PROTECTED]
> > > https://listman.redhat.com/mailman/listinfo/redhat-list
> > --
> > Carl D. Blake
> > Electronics Design Engr. Mgr.
> > Boeckeler Instruments, Inc.
> > 4650 S. Butterfield Dr.
> > Tucson, AZ 85714
> >
> > Phone: 520-745-0001
> > FAX: 520-745-0004
> > email: [EMAIL PROTECTED]
> >
> >
> >
> > _______________________________________________
> > Redhat-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/redhat-list
>
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
--
Carl D. Blake
Electronics Design Engr. Mgr.
Boeckeler Instruments, Inc.
4650 S. Butterfield Dr.
Tucson, AZ 85714
Phone: 520-745-0001
FAX: 520-745-0004
email: [EMAIL PROTECTED]
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
