Thanks all for the witty replies. Made me laugh too.
As for the dmesg, there is nothing there, nor in any of the other logs! (not that I
could see.)
I am attaching the dmesg output (dmesg.txt) incase someone can help.
Thanks,
George
On Mon, 28 Jan 2002 16:58:18 +0000
"Rodolfo J. Paiz" <[EMAIL PROTECTED]> wrote:
> At 1/28/2002 08:15 AM -0800, you wrote:
>
> >Yeah ... you just need to check for some file or other, and make a
> >change to it on some line. And there's this other library you
> >need to install.
>
> Now, now, David... be nice. <smile>
>
> To the original poster: Get the original errors, write them down or copy
> them down *exactly* and post those. If your system does boot correctly, you
> can get those messages from "dmesg | more" then writing them down or
> copying from there.
>
> No one can help you unless you provide that data.
>
>
> --
> Rodolfo J. Paiz
> [EMAIL PROTECTED]
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
Linux version 2.4.7-10custom ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Red Hat Linux 7.1 2.96-98)) #2 Sun Dec 16 23:38:00 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 00000000000ec000 (ACPI NVS)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 32512
zone(0): 4096 pages.
zone(1): 28416 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=MyKernel ro root=305
BOOT_FILE=/boot/vmlinuz-2.4.7-10custom hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 863.880 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1723.59 BogoMIPS
Memory: 124092k/130048k available (1482k kernel code, 4676k reserved, 92k data, 216k
init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfa134, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
Journalled Block Device driver loaded
ACPI: Core Subsystem version [20010615]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S5
Processor[0]: C0 C1 C2
Power Button: found
Power Button: found
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 82365kB/27455kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2020-0x2027, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x2028-0x202f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD200EB-11BHF0, ATA DISK drive
hdb: WDC AC24300L, ATA DISK drive
hdc: LG CD-RW CED-8083B, ATAPI CD/DVD-ROM drive
hdd: COMPAQ DVD-ROM SD-612B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2586/240/63, UDMA(66)
hdb: 8421840 sectors (4312 MB) w/256KiB Cache, CHS=557/240/63, UDMA(33)
ide-floppy driver 0.97
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
hdb: hdb1 hdb2 hdb3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 321k freed
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 216k freed
Adding Swap: 128480k swap-space (priority -1)
Adding Swap: 257032k swap-space (priority -2)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 23:23:38 Dec 16 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xeec0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: USB new device connect on bus1/1/4, assigned device number 3
usb.c: USB device 3 (vend/prod 0x49f/0xe) is not claimed by any active driver.
usb.c: registered new driver hid
input0: USB HID v1.00 Keyboard [Compaq Compaq Internet Keyboard] on usb1:3.0
usb-uhci.c: interrupt, status 2, frame# 1383
usb-uhci.c: interrupt, status 2, frame# 1389
usb_control/bulk_msg: timeout
hiddev0: USB HID v1.00 Device [Compaq Compaq Internet Keyboard] on usb1:3.1
usb.c: registered new driver hiddev
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,5), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,66), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdd: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LG Model: CD-RW CED-8083B Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
8139too Fast Ethernet driver 0.9.18a
PCI: Enabling device 01:08.0 (0004 -> 0007)
PCI: Found IRQ 3 for device 01:08.0
PCI: Sharing IRQ 3 with 00:01.0
eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0x48892000, 00:00:e8:8b:cf:54, IRQ 3
eth0: Identified 8139 chip type 'RTL-8139A'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0x44000000
memory : 47b402a0
memory : 00000000
memory : 47b402e0
spurious 8259A interrupt: IRQ7.
maestro3: version 1.22 built at 23:23:01 Dec 16 2001
PCI: Found IRQ 5 for device 01:05.0
PCI: Sharing IRQ 5 with 00:1f.3
maestro3: Configuring ESS Allegro found at IO 0x1000 IRQ 5
maestro3: subvendor id: 0xb19d0e11
ac97_codec: AC97 Audio codec, id: 0x4583:0x8308 (ESS Allegro ES1988)
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PPP BSD Compression module registered
PPP Deflate Compression module registered
