-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Charles Galpin
Sent: Wednesday, April 04, 2001 7:27 PM
To: [EMAIL PROTECTED]
Subject: RE: Problem starting transparent proxy (squid)
I have loaded all the modules you specfied in the previous mail (no using
the scripts you gave me, since I cannot get it working. I just load them by
typing in the terminal). After that, I type the commands you stated (with no
errors), and I restarted my squid. I have set the DNS server of the
workstation pointing to my ISP, the default gateway pointing to my Linux
server. My workstation can now ping the IP address of the ISP, but it cannot
ping other external IP addresses. How am I gonna solve the problem?
On Wed, 4 Apr 2001, Temp wrote:
you can type them in to a terminal (as root) to test them. Once you have
it working, you can put it in a file to be run for you at startup. There
are many ways to do this. One is to put them in
/etc/rc.d/rc.local. Another is to create a "service" script and put it in
/etc/rc.d/init.d, but for a beginner I'd suggest /etc/rc.d/rc.local
> And I want to know that, what is the function of the line >
> echo "ip_masq 192.168.1.3"
>
> perform? It seems to me that it is just echo a string (where to echo to?).
correct. You can see it on your terminal as the machine boots (the snippet
I gave you came from rc.local on one of my machines)
> And is this true that I can omit and ".o" in all files (and are you sure
> that I have all the files you listed? I'm using Red Hat Linux 7.0)?
Yes, sorry about that. The snippet is from a 6.2 machine. Use this to load
all modules avialable on your 7.0 machine
# Load all available ip_masq modules
OLD_DIR="$PWD"
cd /lib/modules/`uname -r`/ipv4/
for amod in ip_masq* ; do
masqmod=`echo ${amod} | sed -e 's/\.o$//'`
echo installing $masqmod
/sbin/modprobe "$masqmod"
done
cd "$OLD_DIR"
> If I'm going to place the lines into a script file, how can it find all
> these files?
see above
>
> In your example, I see 2 IP addresses, one is "192.168.1.3" and one is
> "192.168.1.0". How should I replace them for my case? My Linux Server's IP
> is "192.168.0.81", my Windows NT workstation's IP is "192.168.0.42". Is it
> true that the first one is for Linux server, the second one is for Windows
> NT workstation?
Ok, in your case replace 192.168.1 with 192.168.0. Ignore the last
3. You will have to do some reading/learning about subneting networks,
but for now just believe me that when using syntax like 192.168.0.0/24 you
are saying to cover all IPs starting with 192.168.0.
Thats a crappy explanation, but ohers can do better, and I honestly don't
have time right now. Run these ipchains commands, setup a pc to use it as
it's gateway and see how it works for you.
> Thanks in advance!
you are welcome
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
