What are the outputs of 'lsmod' right after bootup. Which mod is your card?
Is it being used?
What make and model is your card? Computer?
Are any other comps assigned that IP address?
Drew
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of David Brett
Sent: Monday, February 12, 2001 5:17 PM
To: [EMAIL PROTECTED]
Subject: ethernet startup problems
When ever the computer restarts, the ehternet is not active. I cannot
find out why. I am always able to make it active. Here is ifcfg-eth0
file
DEVICE="eth0"
USERCTL=yes
ONBOOT="yes"
BOOTPROTO="none"
BROADCAST=192.168.1.255
NETWORK=192.168.1.0
NETMASK="255.255.255.0"
IPADDR="192.168.1.2"
IPXNETNUM_802_2=""
IPXPRIMARY_802_2="no"
IPXACTIVE_802_2="no"
IPXNETNUM_802_3=""
IPXPRIMARY_802_3="no"
IPXACTIVE_802_3="no"
IPXNETNUM_ETHERII=""
IPXPRIMARY_ETHERII="no"
IPXACTIVE_ETHERII="no"
IPXNETNUM_SNAP=""
IPXPRIMARY_SNAP="no"
IPXACTIVE_SNAP="no"
david
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
