this is my /etc/conf.modules with a sblive
[root@xxx cad]# cat /etc/conf.modules
alias parport_lowlevel parport_pc
post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2
alias eth0 rtl8139
alias sound-slot-0 emu10k1
alias net-pf-17 af_packet
alias net-pf-1 unix
hope it helps
eric
Martin Brown wrote:
>
> On Sun, 10 Sep 2000, kf wrote:
>
> >
> >
> > On Sun, 10 Sep 2000, Gordon Messmer wrote:
> >
> > = On Sun, 10 Sep 2000, kf wrote:
> > =
> > = > I distinctly remember reading that the SB Live was supported for Linux.
> > = > Now that I'm getting around to trying to set this card up, I can't find
> > = > documentation which will admit to it.
> > =
> > = Use the emu10k1 driver. In /etc/conf.modules:
> > =
> > = alias sound emu10k1
> > =
> > = That should be all that's required.
> >
> > Did it. Fired up "GnomeFoot | Multimedia | CD Player" and nothing. The
> > seconds were ticking off in the display, but there was nothing coming out
> > of the speakers. The /var/log/messages file has been saying
> >
> > modprobe: can't locate module char-major-14
> >
> > repeatedly... hundreds of times.
> >
> > Opened up "Control Panel | Sound" and tried playing some of the little
> > tunes there (e.g., gnibbles/crash.wav) and nothing there either-- no sound
> > output from the speakers. Did "ls -l /dev | grep 14," and found a lot of
> > devices there (i.e., audio, audio1, dsp, dsp1, midi00 - midi03, mixer,
> > mixer1, sequencer, and sndstat. So maybe I'm missing a link...?
> >
> > Any other tips?
> >
>
> This is what I have in my /etc/conf.modules file:
>
> # for sb live
> # alias sound emu10k1
>
> # the above line was supposedly all that was needed for SB Live
> # audio cards to work, apparently that was not the case
>
> # need to double check that at some point
> # are there still bad audio messages during boot up
>
> alias char-major-14 emu10k1
> pre-install emu10k1 insmod soundcore
> post-remove emu10k1 rmmod soundcore
>
> #########
>
> the above works, but there are some error messages during boot up.
> I need to see what's going on, but it works for me.
>
> - Martin J. Brown, Jr. -
> - [EMAIL PROTECTED] -
>
> NEW!! PGP Public Key ID: 0xCED9BD8A Key Server: http://www.keyserver.net/en/
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
