** Reply to message from Vidiot <[EMAIL PROTECTED]> on Sun, 27
Aug 2000 14:42:42 -0500 (CDT)
> After many hours of everything than can go wrong going wrong, I got a
> couple of Linksys LNE100TX cards, one of which will go in right now
> for the DSL connection and the other for the in-house network.
>
> The problem is that the system sees the new card, it won't configure a
> moule for it. What-the-Hell? So, what do I tell netcfg to use for the
> driver? If the web site is right, it is a "tulip" driver?
<snip>
Go to:
http://www.scyld.com/network/updates.html
and read the info there. The version of tulip driver you have is not
current enough to work with the Linksys cards. You will be able to
download and compile a proper tulip module for the card from the source
available at the ftp site given on the above page. I did so for my
Linksys card and it now works flawlessly. Give me a shout if you have
any problems.
Jack Bowling
Prince George, BC
mailto:[EMAIL PROTECTED]
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
