Darryl Harvey wrote:
>
> So I have a 10/100 LAN card installed, it is a RealTek 8139 derived card
> and seems to work just fine with the rtl8139.o module.
>
> But what I want to know is how it has configured itself (It is an auto
> configure card). How can I chekc to see if it is 10Mbs/100Mbs Full or half
> duplex??
>
> (It is attached to a 10/100 switch, so I want to confirm the setup and speed)
>
> [root@carton darryl]# lsmod
> Module Size Used by
> nls_iso8859-1 2244 1 (autoclean)
> rtl8139 11976 1 (autoclean)
>
> So the module is there, the network is active, but how can I check the
> settings?
>
> Thanks
> Darryl
>
> --
> To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
> as the Subject.
You can use mii-diag tool for this:
http://cesdis.gsfc.nasa.gov/linux/diag/index.html
--
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Bruno Dufresne E-Mail:[EMAIL PROTECTED]
Swiss Federal Institute of Technology
Institute for computer Communications Phone:(+41 21) 693 56 12
and Aplications Fax:(+41 21) 693 66 10
(EPFL-DI-ICA) http://icawww.epfl.ch/~dufresne
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
