Scott -
Appreciate your assistance. I realized that you had done that, and thats
okie...i *DID* know what you meant....haahaa. My problem has been that
ever since i upgraded to pppd2.3.3-2 i have been unable to get the
second B channel to sync and i didnt do anything to my original ppp
script. I used to just su to root and fire ppp up with the ppp-go shell
script. Originally from pppsetup, a nice little command line front-end
that writes a script to connect you, worked well!!
Last nite, as a test, i hooked the ISDN modem back up to the win95
machine and after going thru the 3COM setup and checking the spids
again, i was able to get both channels up and running. Hooked it back up
to the linux box, without powering down, and still was unable to get
dual channels. i cannot believe that a simple upgrade of the pppd BROKE
my ability to enable ML-PPP.
I am going to try that '\&' in the ATDT command later this evening and
try netcfg AGAIN!
Michael Weiner
---
Scott Kindley wrote:
> hunter,
>
> I would use the syntax specified by your modem manufacturer.
>
> I gave you the init string for my farralon netopia by mistake. the two are
> vitual clones but the init strings are different. I apologize for my error.
> Try this one which is for the 3com impact IQ:
>
> AT E0 V1 &D2 &C1 S0=0 S71=1 S82=2
>
> lemme know if it doesnt work. I have used these modems and achieved duel
> channel bonding on both in linux 4.2 and 5.0.
>
> Scott
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
