I'm running RH 5.0, on a P60 with a Cirrus Logic video card (2MB) and a generic SVGA monitor. When I 'startx' I always end up in 320x200 mode. I get the following output from the server when it starts: (**) SVGA: Graphics device ID: "Primary Card" (**) SVGA: Montior ID: "Primary Monitor" (--) SVGA: PCI: Matrox Unknown chipset (0x0d10) rev 0, Memory @ 0x02200000 (--) SVGA: chipset: generic (**) SVGA: videoram 2048k (--) SVGA: clocks: 25.18 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Using builtin drvier modes (--) SVGA: Builtin Mode: 320x200 (**) SVGA: Virtual resolution set to 640x480 SuperProbe thinks it's a Matrox card and defaults to 320x40, but configX isn't fooled and starts off in a higher resolution (looks like 800x600). I'm fairly sure my /etc/X22/XF86Config file is correct as it's configX that's creating it.. Any suggestions as to what might be wrong? Many thanks, M. -- "History shows again and again how nature points up the folly of men." [EMAIL PROTECTED] -- PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES! http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject.
